Solved: VMPS feature on Cat 3650

DominikPecak · ‎08-02-2018

Hello,

VMPS is supported on Cat 3650? Command reference guide shows that IOS-XE 16.5.1a has commands related to VMPS, but switch is not accepting them.

Anyone have similar problem?

Julio E. Moisa · ‎08-02-2018

Hi

Try using this Cisco Tool, select XE OS and platform

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

View solution in original post

paul driver · ‎08-02-2018

Hello

It could be that it isnt supported on that ios.

Can ypu post the output from:
show vmps

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

DominikPecak · ‎08-02-2018

I cannot use that command - IOS-XE doesn't recognize it.

Command Reference, Cisco IOS XE Everest 16.5.1a for Catalyst 3650 Switches (https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16-5/command_reference/b_165_3650_cr/b_165_3650_cr_chapter_010101.html) lists commands related to VMPS.

So, it is supported or not?

Julio E. Moisa · ‎08-02-2018

Hi

Try using this Cisco Tool, select XE OS and platform

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

>> Marcar como útil o contestado, si la respuesta resolvió la duda, esto ayuda a futuras consultas de otros miembros de la comunidad. <<

DominikPecak · ‎08-02-2018

Feature Navigator shows that 3650 doesn't support VMPS :(. Now is time to migrate to ISE.