12-06-2012 06:32 AM - edited 03-07-2019 10:25 AM
Heads up to anyone that has been patiently waiting. I didn't see any official word from Cisco yet but noticed they dropped 4500 v 3.4.0SG yesterday, bringing VSS with it!
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27990-01.html
Who will be the first to test?
12-06-2012 03:07 PM
Thanks for the update!
12-06-2012 06:25 PM
Same here. Thanks for the update.
12-27-2012 10:19 PM
Thanks for updates....Good news.
01-11-2013 02:34 AM
Hi,
does anyone have some more information about VSS on 4500? What I'm interested to know if it is the same as VSS on 6500: same config? feature-parity?
Thanks
01-11-2013 02:37 AM
Its pretty easy to setup.just followed this guide from cisco http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1214257
01-11-2013 02:48 AM
Thanks Siemens,
but as I already know (and configured) VSS on 6500, I was interested on a document describing the differencies (if they exists) between VSS for 6500 and VSS for 4500.
01-14-2013 06:45 AM
One difference I see is the lack of fast-hello for dual-active detection:
4500X#sh switch virtual dual-active fast-hello
Executing the command on VSS member switch role = VSS Active, id = 1
Command sh switch virtual dual-active fast-hello is not supported
Executing the command on VSS member switch role = VSS Standby, id = 2
Command sh switch virtual dual-active fast-hello is not supported
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide