12-08-2012 03:52 AM - edited 03-07-2019 10:28 AM
Hi
i m going to convert my two 6500 to VSS , i have the below module on each 6500 . does the VSS work fine and well with modules listed below?? , pls give me video for VSS implenatation and verifactions
1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX
2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX
3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX
4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G
7 3 Network Analysis Module WS-SVC-NAM-1-250S
8 6 Firewall Module WS-SVC-FWM-1
9 48 CEF720 48 port 1000mb SFP WS-X6748-SFP
thanks to all
ibtahim
12-08-2012 05:35 AM
Hello Ibrahim,
6148 are not supported in VSS and they will be left unpowered you should change them with 6748 modules like the one in last slot.
FWSM and NAM are service modules and require appropriate minimum firmware version to be supported in VSS you should upgrade them first if necessary.
see
! VSS FAQ
! design with VSS
http://www.cisco.com/en/US/docs/solutions/Enterprise/Campus/VSS30dg/VSS-dg_ch3.html
! integration of service modules in VSS
http://www.cisco.com/en/US/products/ps9336/products_tech_note09186a0080a7c72b.shtml
here see the first table that provides the minimal firmware version for each type of service module
4.0.4 for FWSM and 3.6.(1a) for NAM
! migration guide from standalone to VSS follow carefully this document
http://www.cisco.com/en/US/products/ps9336/products_tech_note09186a0080a7c74c.shtml
! VSS product page
http://www.cisco.com/en/US/products/ps9336/index.html
Hope to help
Giuseppe
12-08-2012 05:42 AM
Hello Giuseppe
Million thanks my freind , you save my job , God Bless you
thanks
Ibrahim
12-09-2012 08:02 AM
Hi Giuseppe
i have question pls
would you please give documentation for 6148 , that mentioned not isn't support VSS ,
i m happy coz our module X6748-GE-TX support vss
thanks
12-09-2012 08:11 AM
Ibrahim,
Only the 67xx , 68xx and 69xx series line cards support VSS. The 61xx series do not support VSS.
Reza
12-09-2012 08:15 AM
Hi
and just to add to the other posts make sure tht they have dfc3c
Sent from Cisco Technical Support iPhone App
12-09-2012 08:25 AM
Hi Riza Hi mahmood , i need documents to show it to my Boss
thanks
12-09-2012 08:56 AM
Ibrahim,
show your boss table-1 in this link and ask him for a raise.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html
Hardware and Software Requirements and Restrictions
HTH
12-09-2012 09:07 AM
Hi Reza
this link already provided by Giuseppe
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide