VTP identify id changing

[Nader ibrahimi]

How to change this identity ip address in VTP which shows the switch ip address that modified the last changes. 

right now its 0.0.0.0 .

how to give or change this ip address to one of vlan ip address?

[M02@rt37 · Accepted solution]

Hello @Nader ibrahimi 

The VTP identity IP address shown as 0.0.0.0 usually indicates that no active VLAN interface with an IP address exists on the switch or the switch hasn't advertised or synchronized VTP updates.

So, you need to assign an IP address to a vlan interface on the switch. Configure the desired voan interface with an IP address using the interface vlan <VLAN_ID> command, followed by ip address and mask. Ensure the interface is active (up/up). Once this is done, make a minor VTP configuration change, such as creating or modifying a VLAN, to force an update in the VTP database.