04-27-2018 12:32 PM - edited 03-08-2019 02:49 PM
Hello people,
When i reload my switches the vlans from the VTP server are no longer on the clients, but before i reload they are there, and i have to open the vlans again and redo the VTP commands? is this a bug?
04-27-2018 12:44 PM
so your VTP config is also gone from the switches?
04-27-2018 12:45 PM
Yes, when issuing the show run, vtp is not displayed even when its working
04-27-2018 12:46 PM
04-27-2018 12:47 PM
ALS1#show version
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 21-Aug-08 11:39 by nachen
Image text-base: 0x00003000, data-base: 0x01100000
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(44)SE5, RELEASE SOFTWARE (fc1)
ALS1 uptime is 13 minutes
System returned to ROM by power-on
System image file is "flash:/c2960-lanbase-mz.122-46.SE.bin"
cisco WS-C2960-24TT-L (PowerPC405) processor (revision P0) with 61440K/4088K bytes of memory.
Processor board ID FCQ1616Y4G9
Last reset from power-on
2 Virtual Ethernet interfaces
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : A4:18:75:B5:F5:80
Motherboard assembly number : 73-11473-11
Power supply part number : 341-0097-03
Motherboard serial number : FCQ16150J1P
Power supply serial number : DCA15148K6G
Model revision number : P0
Motherboard revision number : A0
Model number : WS-C2960-24TT-L
System serial number : FCQ1616Y4G9
Top Assembly Part Number : 800-29859-06
Top Assembly Revision Number : C0
Version ID : V10
CLEI Code Number : COMCX00ARB
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24TT-L 12.2(46)SE C2960-LANBASE-M
Configuration register is 0xF
04-27-2018 12:49 PM
Hello,
which switches do you have, and what IOS version are you running ?
Post the output of 'show vtp status' from te=he server and one of the client switches...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide