08-02-2020 09:00 AM
Running configuration (Router 1841):
!
!
line con 0
login local
!
line aux 0
!
line vty 0
access-class 2 in
password 7 08731E1C
login
transport input telnet
line vty 1 4
access-class 2 in
login local
transport input telnet
line vty 5 15
access-class 2 in
password 7 08731E1C
login
transport input telnet
!
!
!
end
When I connecting the device with telnet, how can I found which line vty is currently using?
Solved! Go to Solution.
08-02-2020 09:06 AM
When I connecting the device with telnet, how can I found which line vty is currently using?
try this command:
show line
you should see something like this:
* 2 VTY - - - - - 8633 0 0/0 -
* 3 VTY - - - - - 15823 0 0/0 -
In this case VTY line 2 and 3 are being used.
HTH
08-02-2020 09:06 AM
When I connecting the device with telnet, how can I found which line vty is currently using?
try this command:
show line
you should see something like this:
* 2 VTY - - - - - 8633 0 0/0 -
* 3 VTY - - - - - 15823 0 0/0 -
In this case VTY line 2 and 3 are being used.
HTH
08-02-2020 09:38 AM
Returns below↓
R1#show line
Tty Line Typ Tx/Rx A Roty AccO AccI Uses Noise Overruns Int
* 0 0 CTY - - - - 0 0 0/0 -
1 1 AUX 9600/9600 - - - - 0 0 0/0 -
* 194 194 VTY - - - 2 17 0 0/0 -
* 195 195 VTY - - - 2 23 0 0/0 -
* 196 196 VTY - - - 2 3 0 0/0 -
197 197 VTY - - - 2 0 0 0/0 -
198 198 VTY - - - 2 0 0 0/0 -
199 199 VTY - - - 2 0 0 0/0 -
200 200 VTY - - - 2 0 0 0/0 -
201 201 VTY - - - 2 0 0 0/0 -
202 202 VTY - - - 2 0 0 0/0 -
203 203 VTY - - - 2 0 0 0/0 -
204 204 VTY - - - 2 0 0 0/0 -
205 205 VTY - - - 2 0 0 0/0 -
206 206 VTY - - - 2 0 0 0/0 -
207 207 VTY - - - 2 0 0 0/0 -
208 208 VTY - - - 2 0 0 0/0 -
209 209 VTY - - - 2 0 0 0/0 -
Line(s) not in async mode -or- with no hardware support:
2-193
I case I have connected with 3 PCs by telnet.
This appropriated which line vty commands, in the running configuration. (first post)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: