Solved: Re: Wireless bridge trunk link, how to access management interfaces

janit · ‎01-09-2024

I'm building a backup wireless bridge. It's going to be trunk link.

How would I access management interfaces of the radios ?

For now it's going to be L2 between 9200s, later another bridge L3 between 9300s.

Tx

Ruben Cocheno · ‎01-09-2024

I would use the native VLAN for the radios

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

View solution in original post

janit · ‎01-09-2024

I'm guessing something to do with native VLan ? Tx

Ruben Cocheno · ‎01-09-2024

@janit

I would use the native VLAN for the radios

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

balaji.bandi · ‎01-09-2024

sure use trunk and allowed VLAN ( also for management you can use native).

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help