cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
651
Views
0
Helpful
1
Replies

Wireless Controller 2504 MPLS remote sites

as00001111
Level 1
Level 1

Hello!

at our main site we have a WLC 2504 and 11 Access points.

They are all in one subnet/vlan.

That's fine.

Furthermore, we have several remote sites connected via MPLS.

The remote sites of course have other subnets.

Is it possible to manage those Cisco Access Point with the WLC at the main site?

Thanks in advance!

1 Accepted Solution

Accepted Solutions

Divya
Level 1
Level 1

Hi,

Yes, you can have the APs deployed at the remote site and operate in Flex connect mode with local Switching enabled on the WLANs. Please refer the below link on Flex connect concept.

Ensure, you have UDP ports 5246 & 5247 allowed over the MPLS link for AP communication to the WLC. 

https://supportforums.cisco.com/document/98646/wireless-lan-flexconnect-configuration-example  

View solution in original post

1 Reply 1

Divya
Level 1
Level 1

Hi,

Yes, you can have the APs deployed at the remote site and operate in Flex connect mode with local Switching enabled on the WLANs. Please refer the below link on Flex connect concept.

Ensure, you have UDP ports 5246 & 5247 allowed over the MPLS link for AP communication to the WLC. 

https://supportforums.cisco.com/document/98646/wireless-lan-flexconnect-configuration-example  

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: