Write Command On Nexus Switchs

[Jonathan THOMAS]

Hello Guys,

It seems that Write Command on Nexus Switchs is not available anymore, can you confirm ?

Is there a way to reactivate it or is there an another short command to save the running configuration on Nexus Switchs ?

Thanks,

Regards,

Jonathan.

[rmcarthur]

Hi Jonathan, yes wr mem has been deprecated for the Nexus.

You could use the alias command to achieve something similar though

switch(config)# cli alias name wrmem copy running-configuration startup-configuration

Not the same but close

[Brian Evan]

cli alias name wr copy run start

[Leo Laohoo]

Cisco has finally delivered on their promise to remove the "write" command.

Cisco will not entertain any PER to put the "write" command back in for Nexus. 

[Jonathan THOMAS]

I see, well thanks to both of you.

I'll will check the alias thing, I didn't know that we can do this.

Thanks again.

Regards,

Jonathan.

[glen.grant]

It's just "copy run start"  to save the config now.  Or copy run tftp  etc...

[Florin Barhala]

Hi Leo,

What was wrong with the "write mem" in the 1st place? Who doesn't like short commands for daiy use?

[regis-santos]

Hi, guys!

For family Cisco Nexus3500 (C3548P-10GX Chassis, in my case) the command correct is:

                 cli alias name wr copy run start

Regards!

[CoreyH]

archive
path ftp://**FILEPATH FOR YOUR SERVER** 
write-memory