Wrong dhcp exclusion on WS-C3650-48PS

[gdspa]

Hi all,

I have a strange problem, with these exclusions

ip dhcp excluded-address 10.139.48.1 10.139.48.43
ip dhcp excluded-address 10.139.49.0 10.139.49.255
ip dhcp excluded-address 10.139.48.49 10.139.48.255

which should permit assignments of range 10.139.48.44...48, I have

gdit04nsw01#sh ip dhcp pool

Pool AP_pool :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 510
Leased addresses : 0
Excluded addresses : 510
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased/Excluded/Total
10.139.48.54 10.139.48.1 - 10.139.49.254 0 / 510 / 510

Do you know about any bug? I use WS-C3650-48PS with 03.06.06E

Add tags

[gdspa]

Hi all,

I have a strange problem, with these exclusions

ip dhcp excluded-address 10.139.48.1 10.139.48.43
ip dhcp excluded-address 10.139.49.0 10.139.49.255
ip dhcp excluded-address 10.139.48.49 10.139.48.255

which should permit assignments of range 10.139.48.44...48, I have

gdit04nsw01#sh ip dhcp pool

Pool AP_pool :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 510
Leased addresses : 0
Excluded addresses : 510
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased/Excluded/Total
10.139.48.54 10.139.48.1 - 10.139.49.254 0 / 510 / 510

Do you know about any bug? I use WS-C3650-48PS with 03.06.06E

[balaji.bandi]

we need to know more configuriaton information of full DHCP pool config.

[gdspa]

Do you mean this configuration?

ip dhcp pool AP_pool
network 10.139.48.0 255.255.254.0

default-router 10.139.48.1

[Leo Laohoo]

It could be a bug.  I'd upgrade the firmware first and see if it makes any difference.