Hi,
I have some error message when my WS-C2960X boot :
CPU rev: B
Image passed digital signature verification
Board rev: 24
Testing DataBus...
Testing AddressBus...
Testing Memory from 0x00000000 to 0x1fffffff.../
Using driver version 4 for media type 1
Xmodem file system is available.
Base ethernet MAC Address: 00:da:55:6b:9d:00
The password-recovery mechanism is enabled.
USB EHCI 1.00
USB EHCI 1.00
USB Console INIT
Initializing Flash...
mifs[5]: 10 files, 1 directories
mifs[5]: Total bytes : 1806336
mifs[5]: Bytes used : 690688
mifs[5]: Bytes available : 1115648
mifs[5]: mifs fsck took 1 seconds.
mifs[6]: 2 files, 1 directories
mifs[6]: Total bytes : 3870720
mifs[6]: Bytes used : 1213440
mifs[6]: Bytes available : 2657280
mifs[6]: mifs fsck took 0 seconds.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 8192
mifs[7]: Bytes available : 249856
mifs[7]: mifs fsck took 1 seconds.
mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes : 258048
mifs[8]: Bytes used : 8192
mifs[8]: Bytes available : 249856
mifs[8]: mifs fsck took 0 seconds.
mifs[9]: 3 files, 2 directories
mifs[9]: Total bytes : 122185728
mifs[9]: Bytes used : 24743424
mifs[9]: Bytes available : 97442304
mifs[9]: mifs fsck took 28 seconds.
...done Initializing Flash.
Loading "flash:c2960x-universalk9-mz.152-4.E8.bin"...Verifying image flash:c2960x-universalk9-mz.152-4.E8.bin....................................................................................................................................................................................................................................................................................................................................................................................Image passed digital signature verification
[...]
File "flash:c2960x-universalk9-mz.152-4.E8.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(4)E8, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Fri 15-Mar-19 10:55 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[7]: 10 files, 1 directories
mifs[7]: Total bytes : 1806336
mifs[7]: Bytes used : 690688
mifs[7]: Bytes available : 1115648
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.
mifs[8]: 2 files, 1 directories
mifs[8]: Total bytes : 3870720
mifs[8]: Bytes used : 1213440
mifs[8]: Bytes available : 2657280
mifs[8]: mifs fsck took 1 seconds.
mifs[8]: Initialization complete.
mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes : 258048
mifs[9]: Bytes used : 8192
mifs[9]: Bytes available : 249856
mifs[9]: mifs fsck took 0 seconds.
mifs[9]: Initialization complete.
mifs[10]: 5 files, 1 directories
mifs[10]: Total bytes : 258048
mifs[10]: Bytes used : 8192
mifs[10]: Bytes available : 249856
mifs[10]: mifs fsck took 0 seconds.
mifs[10]: Initialization complete.
mifs[11]: 3 files, 2 directories
mifs[11]: Total bytes : 122185728
mifs[11]: Bytes used : 24743424
mifs[11]: Bytes available : 97442304
mifs[11]: mifs fsck took 0 seconds.
mifs[11]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not needed(v)
PRST-VBL Debug set from cache (0x3FF,3FF) to All
PRST-VBL API Get (,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - YES > ReloadReason=12ab34Unknown reason
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "ReloadReason=12ab34Unknown reason" of size 34
PRST-VBL STD Anti - keeping ReloadReason=12ab34Unknown reason
PRST-VBL API Get (ReloadReason=12ab34Unknown reason,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - NO ReloadReason=12ab34Unknown reason <= ReloadReason=12ab34Unknown reason
PRST-VBL DET Compare Next - YES ReloadReason=12ab34Unknown reason > prst-dbg=0x3FF
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "prst-dbg=0x3FF" of size 15
PRST-VBL API Get (prst-dbg=0x3FF,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - NO prst-dbg=0x3FF <= ReloadReason=12ab34Unknown reason
PRST-VBL DET Compare Next - NO prst-dbg=0x3FF <= prst-dbg=0x3FF
PRST-VBL DET Compare Next - YES prst-dbg=0x3FF > prst-fls=51
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "prst-fls=51" of size 12
PRST-VBL API Get (prst-fls=51,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - NO prst-fls=51 <= ReloadReason=12ab34Unknown reason
PRST-VBL DET Compare Next - NO prst-fls=51 <= prst-dbg=0x3FF
PRST-VBL DET Compare Next - NO prst-fls=51 <= prst-fls=51
PRST-VBL DET Compare Next - YES prst-fls=51 > prst-ver=1
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "prst-ver=1" of size 11
PRST-VBL API Get (prst-ver=1,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - NO prst-ver=1 <= ReloadReason=12ab34Unknown reason
PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-dbg=0x3FF
PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-fls=51
PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-ver=1
PRST-VBL DET Compare Next - YES prst-ver=1 > snmpboots=2
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "snmpboots=2" of size 12
PRST-VBL STD Anti - keeping snmpboots=2
PRST-VBL API Get (snmpboots=2,50A1AB0,280,0xC-NMVL-?)
PRST-VBL DET Lock - ok
PRST-VBL DET Compare Next - NO snmpboots=2 <= ReloadReason=12ab34Unknown reason
PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-dbg=0x3FF
PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-fls=51
PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-ver=1
PRST-VBL DET Compare Next - NO snmpboots=2 <= snmpboots=2
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - snmpboots=2 missing in the prst cache
PRST-VBL STD Init cache - ok
PRST-VBL STD Process - waiting on system init
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled
PRST-VBL MED Init complete - filesys added: null
PRST-VBL MED Init complete - filesys added: tar
PRST-VBL MED Init complete - filesys added: tftp
PRST-VBL MED Init complete - filesys added: xmodem
PRST-VBL MED Init complete - filesys added: ymodem
PRST-VBL MED Init complete - filesys added: hidden-nvram
PRST-VBL MED Init complete - filesys added: nvram
PRST-VBL MED Init complete - filesys added: syslog
POST: MA BIST : Begin
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
extracting front_end/front_end_ucode_info (43 bytes)
Waiting for Stack Master Election...
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : MAC Loopback Passed
POST: EMAC Loopback Tests : PHY Loopback Passed
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 1 booting as Master
Waiting for Port download...Complete
Initializing Port Extension Feature Support...
PRST-VBL MED Init complete - filesys added: rcp
PRST-VBL MED Init complete - filesys added: ftp
PRST-VBL MED Init complete - filesys added: http
PRST-VBL API Get (snmpboots,7F54828,11,0x0-DEFAULT)
PRST-VBL DET Lock - ok
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "2" of size 2
PRST-VBL MED Init complete - filesys added: scp
[...]
PRST-VBL MED Init complete - filesys added: https
PRST-VBL MED Init complete - filesys added: cns
PRST-VBL API Get (ReloadReason,7F54798,281,0x0-DEFAULT)
PRST-VBL DET Lock - ok
PRST-VBL DET Cache unlock - ok
PRST-VBL API Get - ok returning "12ab34Unknown reason" of size 21
cisco WS-C2960X-48TD-L (APM86XXX) processor (revision L0) with 524288K bytes of memory.
Processor board ID FOC1949S04E
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address :
Motherboard assembly number : 73-16688-03
Power supply part number : 341-0537-02
Motherboard serial number :
Power supply serial number : LIT194312UX
Model revision number : L0
Motherboard revision number : A0
Model number : WS-C2960X-48TD-L
Daughterboard assembly number : 73-14200-03
Daughterboard serial number : FOC194807AG
System serial number : FOC1949S04E
Top Assembly Part Number : 68-100466-01
Top Assembly Revision Number : A0
Version ID : V05
CLEI Code Number : CMMNH00ARD
Daughterboard revision number : A0
Hardware Board Revision Number : 0x18
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 52 WS-C2960X-48TD-L 15.2(4)E8 C2960X-UNIVERSALK9-M
PRST-VBL MED Init complete - filesys added: flash1
Press RETURN to get started!
*Mar 1 00:00:17.280: Read env variable - LICENSE_BOOT_LEVEL =
*Jan 2 00:00:00.150: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2960x_lanbase Next reboot level = lanbase and License = lanbase
*Jan 2 00:00:01.516: PRST-VBL Debug set from cache (0x3FF,3FF) to All
*Jan 2 00:00:01.565: PRST-VBL API Get (,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:01.593: PRST-VBL DET Lock - ok
*Jan 2 00:00:01.674: PRST-VBL DET Compare Next - YES > ReloadReason=12ab34Unknown reason
*Jan 2 00:00:01.712: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:01.803: PRST-VBL API Get - ok returning "ReloadReason=12ab34Unknown reason" of size 34
*Jan 2 00:00:01.876: PRST-VBL STD Anti - keeping ReloadReason=12ab34Unknown reason
*Jan 2 00:00:01.964: PRST-VBL API Get (ReloadReason=12ab34Unknown reason,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:01.992: PRST-VBL DET Lock - ok
*Jan 2 00:00:02.111: PRST-VBL DET Compare Next - NO ReloadReason=12ab34Unknown reason <= ReloadReason=12ab34Unknown reason
*Jan 2 00:00:02.205: PRST-VBL DET Compare Next - YES ReloadReason=12ab34Unknown reason > prst-dbg=0x3FF
*Jan 2 00:00:02.243: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:02.313: PRST-VBL API Get - ok returning "prst-dbg=0x3FF" of size 15
*Jan 2 00:00:02.380: PRST-VBL API Get (prst-dbg=0x3FF,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:02.408: PRST-VBL DET Lock - ok
*Jan 2 00:00:02.502: PRST-VBL DET Compare Next - NO prst-dbg=0x3FF <= ReloadReason=12ab34Unknown reason
*Jan 2 00:00:02.576: PRST-VBL DET Compare Next - NO prst-dbg=0x3FF <= prst-dbg=0x3FF
*Jan 2 00:00:02.649: PRST-VBL DET Compare Next - YES prst-dbg=0x3FF > prst-fls=51
*Jan 2 00:00:02.684: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:02.750: PRST-VBL API Get - ok returning "prst-fls=51" of size 12
*Jan 2 00:00:02.813: PRST-VBL API Get (prst-fls=51,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:02.841: PRST-VBL DET Lock - ok
*Jan 2 00:00:02.936: PRST-VBL DET Compare Next - NO prst-fls=51 <= ReloadReason=12ab34Unknown reason
*Jan 2 00:00:03.005: PRST-VBL DET Compare Next - NO prst-fls=51 <= prst-dbg=0x3FF
*Jan 2 00:00:03.075: PRST-VBL DET Compare Next - NO prst-fls=51 <= prst-fls=51
*Jan 2 00:00:03.142: PRST-VBL DET Compare Next - YES prst-fls=51 > prst-ver=1
*Jan 2 00:00:03.177: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:03.243: PRST-VBL API Get - ok returning "prst-ver=1" of size 11
*Jan 2 00:00:03.306: PRST-VBL API Get (prst-ver=1,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:03.330: PRST-VBL DET Lock - ok
*Jan 2 00:00:03.425: PRST-VBL DET Compare Next - NO prst-ver=1 <= ReloadReason=12ab34Unknown reason
*Jan 2 00:00:03.495: PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-dbg=0x3FF
*Jan 2 00:00:03.561: PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-fls=51
*Jan 2 00:00:03.628: PRST-VBL DET Compare Next - NO prst-ver=1 <= prst-ver=1
*Jan 2 00:00:03.694: PRST-VBL DET Compare Next - YES prst-ver=1 > snmpboots=2
*Jan 2 00:00:03.729: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:03.795: PRST-VBL API Get - ok returning "snmpboots=2" of size 12
*Jan 2 00:00:03.844: PRST-VBL STD Anti - keeping snmpboots=2
*Jan 2 00:00:03.907: PRST-VBL API Get (snmpboots=2,50A1AB0,280,0xC-NMVL-?)
*Jan 2 00:00:03.935: PRST-VBL DET Lock - ok
*Jan 2 00:00:04.026: PRST-VBL DET Compare Next - NO snmpboots=2 <= ReloadReason=12ab34Unknown reason
*Jan 2 00:00:04.096: PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-dbg=0x3FF
*Jan 2 00:00:04.166: PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-fls=51
*Jan 2 00:00:04.232: PRST-VBL DET Compare Next - NO snmpboots=2 <= prst-ver=1
*Jan 2 00:00:04.299: PRST-VBL DET Compare Next - NO snmpboots=2 <= snmpboots=2
*Jan 2 00:00:04.337: PRST-VBL DET Cache unlock - ok
*Jan 2 00:00:04.404: PRST-VBL API Get - snmpboots=2 missing in the prst cache
*Jan 2 00:00:04.438: PRST-VBL STD Init cache - ok
*Jan 2 00:00:04.494: PRST-VBL STD Process - waiting on system init
*Jan 2 00:00:04.673: PRST-VBL MED Init complete - filesys added: null
*Jan 2 00:00:04.729: PRST-VBL MED Init complete - filesys added: tar
*Jan 2 00:00:04.788: PRST-VBL MED Init complete - filesys added: tftp
*Jan 2 00:00:04.851: PRST-VBL MED Init complete - filesys added: xmodem
*Jan 2 00:00:04.910: PRST-VBL MED Init complete - filesys added: ymodem
Apr 11 14:22:15.136: PRST-VBL MED Init complete - filesys added: hidden-nvram
Apr 11 14:22:15.192: PRST-VBL MED Init complete - filesys added: nvram
Apr 11 14:22:15.255: PRST-VBL MED Init complete - filesys added: syslog
Apr 11 14:22:15.276: in Switch 0. Cannot read pid from Flexstack module
Apr 11 14:22:53.161: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack
Apr 11 14:22:54.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 14:22:54.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
Apr 11 14:22:54.880: PRST-VBL MED Init complete - filesys added: rcp
Apr 11 14:22:55.478: PRST-VBL MED Init complete - filesys added: ftp
Apr 11 14:22:55.541: PRST-VBL MED Init complete - filesys added: http
Apr 11 14:22:55.625: PRST-VBL API Get (snmpboots,7F54828,11,0x0-DEFAULT)
Apr 11 14:22:55.653: PRST-VBL DET Lock - ok
Apr 11 14:22:55.691: PRST-VBL DET Cache unlock - ok
Apr 11 14:22:55.744: PRST-VBL API Get - ok returning "2" of size 2
Apr 11 14:22:55.803: PRST-VBL MED Init complete - filesys added: scp
Apr 11 14:22:57.299: PRST-VBL MED Init complete - filesys added: https
Apr 11 14:22:57.303: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
Apr 11 14:22:57.624: PRST-VBL MED Init complete - filesys added: cns
Apr 11 14:22:58.785: PRST-VBL API Get (ReloadReason,7F54798,281,0x0-DEFAULT)
Apr 11 14:22:58.812: PRST-VBL DET Lock - ok
Apr 11 14:22:58.851: PRST-VBL DET Cache unlock - ok
Apr 11 14:22:58.928: PRST-VBL API Get - ok returning "12ab34Unknown reason" of size 21
Apr 11 14:23:20.308: PRST-VBL MED Init complete - filesys added: flash1
Apr 11 14:23:20.375: %STACKMGR-5-SWITCH_READY: Switch 1 is READY
Apr 11 14:23:20.375: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Apr 11 14:23:20.375: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 1 has changed to state DOWN
Apr 11 14:23:20.986: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY
Apr 11 14:23:21.000: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(4)E8, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Fri 15-Mar-19 10:55 by prod_rel_team
Apr 11 14:23:21.077: PRST-VBL STD Process - running but no timer started
Apr 11 14:23:21.951: PRST-VBL API Set (ReloadReason=12ab34Unknown reason,0x0-DEFAULT)
Apr 11 14:23:21.951: PRST-VBL DET Lock - ok
Apr 11 14:23:21.951: PRST-VBL DET - Util Set - nameval=ReloadReason=12ab34Unknown reason and node->nameval=ReloadReason=12ab34Unknown reason.
Apr 11 14:23:21.951: PRST-VBL STD Util Set - identical ReloadReason=12ab34Unknown reason
Apr 11 14:23:21.951: PRST-VBL DET Cache unlock - ok
Apr 11 14:23:21.951: PRST-VBL API Set - ok return 33
Apr 11 14:23:22.912: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down
Apr 11 14:23:23.915: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
Apr 11 14:23:24.604: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
I need your help please... The SW are clean (no configuration).
