05-24-2010 06:35 AM - edited 03-06-2019 11:14 AM
Hello!
Can I use dynamic and static routing between vlans
on this switcher?
05-24-2010 06:46 AM
Hi
It depends on the ios version deployed in the switch, if its a ip base ios then it provides limited dynamic routing capability in this case you need to upgrade it to ip services.
regds
05-24-2010 06:53 AM
05-24-2010 09:26 AM
Hi osiris,
If you have an IP based version and want to upgrade to a different IOS with different feature set, there is usually a cost involved. Check with your sales rep for pricing.
In the mean time can you post "sh ver"?
you might already have the IOS you need.
HTH
Reza
05-25-2010 12:01 AM
Hello!
Can I use dynamic and static routing between vlans
on this switcher?
Hi,
You can achieve but you need to have ios version supported to do following ios with 3560 switch will support dynamic and staic routing protocol
Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(35)SE5, RELEAS E SOFTWARE (fc1)
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide