08-15-2022 01:28 PM - edited 08-03-2023 11:08 AM
Hi, I have this switch 3850 that does not boot, I tried to boot from usb and initialize with the same error. Also the flash is not recognized. Do you have aniy idea to recover this switch form boot process?
08-15-2022 03:02 PM
Hi,
In rommon try to initialize the flash using "flash_init" command, if this does not help I would suggest to try the Emergency Recovery Procedure
If still the device is unable to boot, most likely need to be replaced.
Regards
David N.
08-15-2022 04:48 PM
Post the complete output to the following ROMMON commands:
08-16-2022 08:09 AM - edited 08-03-2023 11:09 AM
.
08-16-2022 04:26 PM
RMA the switch.
08-16-2022 07:41 PM
Already suggested for RMA
08-16-2022 12:04 AM
You should have to raise RMA for that there seems a Bug..
https://quickview.cloudapps.cisco.com/quickview/bug/CSCue76684
https://www.cisco.com/c/en/us/support/docs/field-notices/636/fn63641.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
