One of the PSU's on a 6509-E is having a very strange issue where only 1 of the 2 power receptacles on PSU#2 works, even after swapping the PSU with a spare. I am trying to verify the power input voltage, and I'm not sure if it is possible to do this via CLI. The following "show power" output appears to show the DC power stats, but not the AC power input. Is there anything else I can do besides getting an electrician involved to look at the circuit?
system power redundancy mode = redundant
system power total = 2671.20 Watts (63.60 Amps @ 42V)
system power used = 1247.40 Watts (29.70 Amps @ 42V)
system power available = 1423.80 Watts (33.90 Amps @ 42V)