WS-X6516-GBIC error on 6513

[Peter Kim]

I have the following error on the log.  Anyone has similar problem?

%PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 2 is experiencing the following error: Port ASIC (PINNACLE) packet buffer failure detected on ports  2, 4, 6, 8

Thanks.

Peter

[Reza Sharifi · Accepted solution]

Peter,

Try this:

This message can indicate a transient Pinnacle  ASIC packet buffer       problem. The first [dec] is the module number. The second [dec] is the  ASIC       number. If the error is limited to a single module, reseat and then  power cycle       the module. If you see this error message frequently, contact       Cisco        Technical Support for further assistance.

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008014f550.shtml

HTH

Reza