WS-X6748-GE-TX and auto mdix

[eric.loiseau]

Hi,

Can I use auto mdix on WS-X6748-GE-TX card with native IOS ?

I read some information that with Catos the command is supported but nothing about IOS.

Regards

[andrew.butterworth · Accepted solution]

According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/I1.html#wp1684741

It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.

Andy