cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
462
Views
0
Helpful
3
Replies
Kashish_Patel
Explorer

xenpak and x2

Hi,

I need to connect a 6500 switch with a 4948 switch using 10G optics.

On 6500, line card used is WS-X6704-10GE and I am aware that WS-X6704-10GE is a xenpak and 4948 ports are X2. What is the way to make the connection between xenpak and X2 work?

Thanks,

Kashish

1 ACCEPTED SOLUTION

Accepted Solutions
Leo Laohoo
VIP Community Legend

Make sure you use the same at each end.

LR and LR or SR and SR.

View solution in original post

3 REPLIES 3
Leo Laohoo
VIP Community Legend

Make sure you use the same at each end.

LR and LR or SR and SR.

View solution in original post

Thanks Leo. That's what I thought ( From https://supportforums.cisco.com/thread/141785)

.

Thanks Kashish.