Tag: "2800_routers" in "Technology and Support" - Cisco Community

Latest Tagged

When a PSTN call comes in through 28xx Series Voice IOS Gateway to the IP Phone, the PSTN caller hea... - ( ‎06-22-2009 04:05 PM )

by on

0 Replies 1919 Views

0 Replies

1919 Views

When using a 2851 IOS H323 gateway with it's T1controller configured for FXO-Loopstart and SF/AMI, c... - ( ‎06-22-2009 06:14 PM )

by on

0 Replies 1666 Views

0 Replies

1666 Views

Cisco 2800 Series Routers crash with "%SYS-2-MALLOCFAIL: Memory fragmentation No Alternate pool" er... - ( ‎06-22-2009 05:37 PM )

by on

0 Replies 2227 Views

0 Replies

2227 Views

On a 2800 Series router that runs Cisco IOS Software Release 12.3(11)YS or later and is configured a... - ( ‎06-17-2009 10:14 PM )

by on

0 Replies 1791 Views

0 Replies

1791 Views

Cannot configure the Cisco VIC-4FXS/DID Analog Voice Interface Card to use DID trunk ports on a Cisc... - ( ‎06-22-2009 04:41 PM )

by on

0 Replies 2275 Views

0 Replies

2275 Views

Power over Ethernet cannot be configured or enabled due to a missing jumper cable on a 2800 ISR with... - ( ‎06-17-2009 10:20 PM )

by on

0 Replies 1814 Views

0 Replies

1814 Views

Fax transmissions are incomplete or corrupted due to digital clock slips on a Cisco 2800 or 3800 Int... - ( ‎06-22-2009 03:31 PM )

by on

0 Replies 3210 Views

0 Replies

3210 Views

Users cannot configure the PRI-group and "% No DSP resources available to configure pri-group on con... - ( ‎06-22-2009 03:33 PM )

by on

0 Replies 3505 Views

0 Replies

3505 Views

How to wire the pinouts of a T1 cable to connect a 2801 router with PBX - ( ‎06-22-2009 03:35 PM )

by on

0 Replies 13537 Views

0 Replies

13537 Views

Cisco 2800 Series Integrated Services Routers - ( ‎07-02-2009 04:13 AM )

by on

0 Replies 4273 Views

0 Replies

4273 Views

Top Tagged

When using a 2851 IOS H323 gateway with it's T1controller configured for FXO-Loopstart and SF/AMI, c... - ( ‎06-22-2009 06:14 PM )

by on

0 Replies 1666 Views

0 Replies

1666 Views

Which IOS supports the HWIC-AP-G-A interface card on the Cisco wireless access router - ( ‎06-22-2009 06:07 PM )

by on

0 Replies 1742 Views

0 Replies

1742 Views

With an MGCP gateway that uses the NM-HDV, the secure RTP does not work because of which of the medi... - ( ‎06-22-2009 06:05 PM )

by on

0 Replies 827 Views

0 Replies

827 Views

Cisco 2800 Series Routers crash with "%SYS-2-MALLOCFAIL: Memory fragmentation No Alternate pool" er... - ( ‎06-22-2009 05:37 PM )

by on

0 Replies 2227 Views

0 Replies

2227 Views

Error message "Insufficient resources to create channel-group" is received when configuring a contro... - ( ‎06-22-2009 03:40 PM )

by on

0 Replies 4859 Views

0 Replies

4859 Views

After the transcoding sessions are configured on the 28xx router, unable to add the transcoder on th... - ( ‎06-22-2009 05:34 PM )

by on

0 Replies 650 Views

0 Replies

650 Views

Configuring pri-group on slot 0 in the 2801 router generates the Insufficient resources to create pr... - ( ‎06-22-2009 05:32 PM )

by on Latest post on by

1 Replies 3507 Views

1 Replies

3507 Views

How to wire the pinouts of a T1 cable to connect a 2801 router with PBX - ( ‎06-22-2009 03:35 PM )

by on

0 Replies 13537 Views

0 Replies

13537 Views

Users cannot configure the PRI-group and "% No DSP resources available to configure pri-group on con... - ( ‎06-22-2009 03:33 PM )

by on

0 Replies 3505 Views

0 Replies

3505 Views

Fax transmissions are incomplete or corrupted due to digital clock slips on a Cisco 2800 or 3800 Int... - ( ‎06-22-2009 03:31 PM )

by on

0 Replies 3210 Views

0 Replies

3210 Views

Top Taggers

User

Count