Buy or Renew
Buy or Renew

Wireless - Mobility Knowledge Base

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Create a new article

Insider User Research program

Knowledge Base Articles

Create a new article

Configure Multi-level CA on OpenSSL to Generate IOS XE Certificates

The Cisco Document Team has posted an article. This document describes a method to create a multi-level CA to create general purpose certificates compatible with Cisco IOS® XE devices. Know of something that needs documenting? ...

802.11 Association Status, 802.11 Deauth Reason codes

  Introduction802.11 Association Status, 802.11 Deauth Reason codes802.11 Association Status CodesCode802.11 definitionExplanation0Successful 1Unspecified failureFor example : when there is no ssid specified in an association request10Cannot support ...

Convert Catalyst 9100 Access Points to Embedded Wireless Controller

The Cisco Document Team has posted an article. This article demonstrates how to convert a Cisco Catalyst 9000 Series Access Point (9105,9115, 9120, 9130) to an Embedded Wireless Controller (EWC). Know of something that needs do...

Configure and Troubleshoot CMX Connectivity with Catalyst 9800 Series Wireless LAN Controllers

The Cisco Document Team has posted an article. This document provides the steps to get Catalyst 9800 Wireless LAN Controller added to Connected Mobile Experiences (CMX) Know of something that needs documenting? Share a new docu...

Troubleshoot 802.1X Clients on Wireless Lan Controller Catalyst 9800 : Changing the Eapol/802.1X Version

The Cisco Document Team has posted an article. This document describes how to help connect old IoT wireless clients who do not support newer 802.1X versions. Know of something that needs documenting? Share a new document reques...

Configure Verify and Troubleshoot Wired Guest in Wireless LAN Controller

The Cisco Document Team has posted an article. This document describes how to configure, verify, and troubleshoot wired guest access in 9800 and IRCM with external web authentication. Know of something that needs documenting? S...

Configure Verify and Troubleshoot Web Auth on Mac Filter Failure

The Cisco Document Team has posted an article. This document describes to Configure, Troubleshoot and Verify Local Web Auth on “Mac Filter Failure” feature using ISE for external authentication. Know of something that needs doc...

View All
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Top Contributors
Featured Article

Vendor Class Identifier DHCP Option 43, Option 60 and option 241

Implementing DHCP Option 43 and Option 60 in external MS-DHCP Server using Vendor Class Identifier. 

Challenge - How to find Cisco device Vendor Class Identifier 

Procedure

Step 1

Implement DHCP Server in Windows Server (Ver. any) 

Step 2

Install Wireshark Network Protocol Analyzer (Packet tracer) in the Windows Server machine where the DHCP server is running. 

After installation select “Ethernet” connection and start packet capturing. 

Step 3

Connect Cisco device (AP/ LWAP/ Switch/ Router). Configure to devices ethernet interfaces “ip address” should be obtained from DHCP server therefore ethernet interface should be configured as “ip address dhcp” 

The connected device starts sending broad casting message packets with its MAC address to lease IP address from DHCP server. 

Wireshark packet tracer already started and capture ethernet packets, it will show the connected MAC address send broadcast message to DHCP server. DHCP server captured the broadcast message and replied to the device. 

If you select the first line of broadcast message of the device in Wireshark packet analyzer, you can easily identify Vendor Class Identifier in left side bottom part of the window. 

 Wiershark AP3702 packet capturingWiershark AP3702 packet capturing

 


Implementing DHCP option 43 and 60 

The generic vendor class identification option is 43. Each vendor has been given a unique vendor identification number in decimal. “241” is used for Cisco Management controller.  When it converts to hexadecimal “F1 or f1”. 

Conversion decimal to hexadecimal: 

241 ÷ 16 = 15 R 1 —> (0.0625 x 16) = 1 = 1  

15 ÷ 16 = 0 R 15 —> (0.9375 x 16) = 15 = f 

When it writes to hexadecimal writes to bottom to top as a “f 1” 

 

Internal DHCP pool configuration 

Internal DHCP pool in Cisco router or switch can use as follows: 

ip dhcp pool VLAN20
  network 172.168.10.0 255.255.255.0
  default-router 172.168.10.1
  dns-server 83.68.72.2
  option 43 hex f104aca80a02 <=  04-indicates one controller/aca80a02-“controller ip:172.168.10.2 in hexadecimal”
  option 60 ascii “Cisco AP c3700”

 

 

External MS_Windows Server DHCP configuration. 

Windows Server DHCPWindows Server DHCP

 

Step 1

Open DHCP Server in Windows Server (Ver. any) 

Expand the DHCP network scope under IPv4

Select on IPv4 and right click the mouse and chose “Define Vendor Classes”.

Define Vendor ClassDefine Vendor Class


 


Press “Add” button in DHCP Vendor Classes dialog box. 

WindowsServer-DHCP-3.PNG

 

 
 
Type Device Display name and Description in "New Class" dialog box and Vendor Class Identifier under ASCII column as “Cisco AP c3700” (alternative method for DHCP option 60 in internal ip DHCP pool). Press "OK" button.

WindowsServer-DHCP-4.PNG


 

 
Select again IPv4 and right click the mouse and chose “Set Predefined Options”. 

WindowsServer-DHCP-6.PNG

 
 
Select Option class  in "Predefined Options and Values" dialog box and choose already created device vendor class.

WindowsServer-DHCP-7.PNGWindowsServer-DHCP-8.PNG


 

 
 
 
 
 
 
 
 
 
 
 
 

Click “Add” button in Predefined Options and Values dialog box. 

WindowsServer-DHCP-9.PNG


 


WindowsServer-DHCP-10.PNG


 

 
 
 
 
 
 
 
 
 

Type Name as “WLC-4402” Wireless controller device, select Data type as “IP Address” and mark Array check box, Type Code as 241 (Management Controller) and Type the Description as Management Controller IP address allocation. Press “OK” button. This is an alternative method for DHCP option 43 in DHCP server and in internal DHCP pool in Cisco router or switch.


WindowsServer-DHCP-11.PNG

 

Then you will be back to the “Predefined Options and Values” dialog box. Press “Edit Array” button. “IP Address Array Editor” dialog box appears and can type number of controllers IP address if more than one WLC controller exist on your network in IP address space. Press “OK” button. 


WindowsServer-DHCP-12.PNGWindowsServer-DHCP-13.PNG
 


 

 
 
 
 
 
 
 
 
 
 
 
Step 3

Select “Scope Options” under created network scope and right click on it, then click “Configure Options”.


WindowsServer-DHCP-14.PNGWindowsServer-DHCP-15.PNG

WindowsServer-DHCP-17.PNG


 

Choose “Advanced” tab in “Scope Options” and click “Vendor class” drop down box arrow. Chose created vendor class device ex. “AP 3702”. Then it will appear created DHCP option as 241 and mark it. Given Management Controller list of IPs addresses appears, you can add or remove or edit in here and press “OK” button.

WindowsServer-DHCP-16.PNGWindowsServer-DHCP-17.PNG

 

 

 

 

 


 


 

 

 

 

WindowsServer-DHCP-18.PNGWindowsServer-DHCP-19.PNG

 

 


 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
It will be added to the network DHCP pool in server, and it will lease the IP to AP with Management Controller IP address. 

WindowsServer-DHCP-25.PNG

 

AIR-CAP3702 console port connected to PC/Laptop USB port and using Cisco CLI analyzer or Putty can read IP status of both devices. (IPs in examples are not real. Above example IP address and below message IP addresses are two different VLANs IP addresses. Don't try to match IP's equality.)

 

WindowsServer-DHCP-22.PNG

 

 

 


 

siskum
Spotlight
Spotlight