hello everyon I tried to highlight the cisco sintax with this help: http://www.linickx.com/875/cisco-asa-syntax-highlighting-with-notepad But it doesn't work, someone has another option? Thanks.
Forum Posts
Hello in the ISR 4000 Stencils file I'm missing the master stencils forNIM-4BRI-NT/TE NIM-2BRI-NT/TE NIM-4BRI-S/T NIM-2BRI-S/T
Security-ISE stencil available at www.cisco.com/c/en/us/products/visio-stencil-listing.html seems to be outdated (05/Mar/2012) and does not include SNS-3595-K9. Anyone knows where to find SNS-3595-K9 Visio Stencil?
We have an old GEN 1 appliance with 3.1 and since we moved 3.7 and Hyper V. We were wondering if the appliance can repurposed to run Windows Server or VMware or HyperV.
@Brett Newman Looking for Visio stencils for the ASR-920-12SZ-A (might as well do the ASR-920-12SZ-D while you're at it). I replied in the original thread but decided to make a new thread since the original is quite long.
Need Visio Stencils for FMC4600. Can someone help.
Resolved! Need Visio stencil for C9500-16X switch
I need a Visio stencil for the relatively new C9500-16X switch. Rick P
I need a CAD model or technical drawing for the mounting bracket(s) for the C9500-24YAC.P/N: 700-111221-01 Rev A0Issue: SFP modules used in front ports requires adapters that cause mating fiber to stick too far out from the front our our rack. We ne...
I've just downloaded the Catalyst 9000 Series Visio stencils and I still do not see any shapes for the Cisco Catalyst 9404 chassis. Are there plans to include these stencils in a future release? We've deployed many of these and we're having to use a ...
Resolved! Python
Hello, I would like to know why my output for installed libraries is lesser than the output in DevNet course.
Resolved! Need Visio Stencil for C9800-L
Need Visio Stencil for C9800-L
Hello, While searching through Cisco's Visio Stencils page, I have been unable to find the stencil for the Catalyst 3560G Series PoE-24. I have searched through the 'Switches - Catalyst 3560' and the 'Switches - Catalyst 2560CS' packages, and was una...
Hello, I would like to know what the Mean Time Between Failure (MTBF) or Failure Rate value is for PN: : C9500-40X-E.
Resolved! How to request missing Visio stencils?
There are several Visio stencils that are missing from the library that I need. They're important to me (and I imagine others want them too) as I need to do rack elevation diagrams. I hate to open a TAC case on them but not sure what else to do. Any ...
I need the Vis3 Stencil for the RV340, but I am not finding it anywhere on the internet, does anyone know where it is possible to download it?
