6000 MXP, and C60 over ASA 7.0

Omar Abdelhalim · ‎01-29-2013

Dear All,

Please, advice me how to solve this issue that I am Facing with 6000MXP Profile Unit, and Also C60 Unit with ASA 7.0.

the problem as following:

1- H.323 Protocol inspected.

2- H.323 Port and Data Ports opened at outside interface as following:

For 6000MXP:

Below are the ports that need to be opened bi-directionally on your firewall for a standalone MXP F8.X or higher endpoint, to successfully make & receive calls to other H323 based endpoints. H323 Non-Traversal Ports – F8.X Or Higher

Function

Port/Range

Type

Direction

Gatekeeper Discovery (RAS)

1719

UDP

↔

Q.931 Call Setup

1720

TCP

↔

H.245 Range

5555-5574

TCP

↔

Video, Audio & Data/FECC Range

2326-2485

UDP

↔

For C60:

Below are the ports that need to be opened bi-directionally on your firewall for a standalone C series TC2.X or higher endpoint, to successfully make & receive calls to other H323 based endpoints. H323 Non-Traversal Ports – TC2.X Or Higher

Function

Port/Range

Type

Direction

Gatekeeper Discovery (RAS)

1719

UDP

↔

Q.931 Call Setup

1720

TCP

↔

H.245 Range

5555-6555

TCP

↔

Video, Audio & Data/FECC Range

2326-2487

UDP

↔

3- Video Call done perfectly, and no problem seen bidirectional.

4- when I presented My PC, the far site did not see any thing and after a few min the call disconnected.

5- when presentation done from the far site the presentation seen to me with no problem.

Please, send me your advices.

Thanks All

Omar Mahmoud

crisalex · ‎02-12-2013

HI Mahmoud,

I have replied on the other identical topic

Maybe you can delet/cancel this post

Cristian