03-30-2014 09:48 AM - edited 03-18-2019 02:49 AM
03-31-2014 05:46 AM
Hi Omar,
The Phone Profile for the CTS-1100 in CUCM will support 1 or 2. The second microphone would be connected to the AEB center mic port 3 (Green port 3).
From the Installation Guide:
Optionally, you can install the second microphone on the opposite side of the table to provide full-table microphone coverage for audio-only conferences. If you install the second microphone, install it 18 inches (46 cm) from the edge of the table that is closest to the CTS 1100.
http://www.cisco.com/c/en/us/td/docs/telepresence/cts_1100/cts_1100_assembly_guide/cts_1100_assembly_guide/1100_installing_mount_and_display.html
In this case, the second microphone would be used for Audio Only Conferences.
- Jonathan
03-31-2014 05:46 AM
Hi Omar,
The Phone Profile for the CTS-1100 in CUCM will support 1 or 2. The second microphone would be connected to the AEB center mic port 3 (Green port 3).
From the Installation Guide:
Optionally, you can install the second microphone on the opposite side of the table to provide full-table microphone coverage for audio-only conferences. If you install the second microphone, install it 18 inches (46 cm) from the edge of the table that is closest to the CTS 1100.
http://www.cisco.com/c/en/us/td/docs/telepresence/cts_1100/cts_1100_assembly_guide/cts_1100_assembly_guide/1100_installing_mount_and_display.html
In this case, the second microphone would be used for Audio Only Conferences.
- Jonathan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide