05-28-2018 12:01 AM - edited 03-18-2019 02:08 PM
Hi All.
I have MCU 5320 is warning fan the fan out of spec.
Please support us to resolve this issue for our customer.
Tks.
05-28-2018 12:20 AM
Hi @Phong Tran ,
Try power cycle of the MCU and see if the status becomes OK. Otherwise open a TAC case with
Event and Diagnostic logs from the MCU to check if it requires replacement.
-Hope this helps !
Rishabh Gupta.
Rate the response & mark as a solution if found appropriate.
05-28-2018 01:05 AM
Hi,
In addition to what Rishabh [+5] has said, u can also connect console to MCU and look for Keyword FAN in the captured logs after u power off and ON the MCU.
you should get message as below
HEALTH_MONITOR : Info : fan speed test successful
regds,
aman
05-30-2018 01:57 AM
I restarted the MCU, it OK. Thank for your support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide