I am trying to route incoming 800 calls over a T1 connecting to a 3640 router to a Call Manager. The 800 number calls come in with a 4 digit tag such as 7405. My problem is what shows up in the called number field is *2125551212*7405*. This is basically the caller ID information and then the 4 digits sent to allow us to route the call. The problem is that the router sees it as all the called number. What am I doing wrong?
I am using a typical
ds0-group 0 timeslots 1-24 e&m-winkstart dtmf dnis command.
Any help would be appreciated...