04-17-2013 10:44 PM - edited 03-18-2019 12:57 AM
What is command to see the live log output using SSH api command via root, please find the below example.
2016.77 VIDEOLC-0 I: VLC_readySignalSourceEvent port:HDMI 1: no signal
2016.78 VIDEOLC-0 I: Received SourceFormatEvent from video link 16 (0x0@0, unknown type, error detected) in ready state
2016.78 MC I: LocalVideoInputGateImpl::setIncomingModeReport(ig=1,p=1) [Video (0): vid-off 0x0@0.0 0k ]
2016.78 MC I: LocalVideoInputGateImpl::recalcIncomingMode(ig=1) res=0x0@0 q=Motion t60=921600 p=Normal
2016.78 MC I: LocalVideoInputGateImpl::recalcIncomingMode(ig=1) res=0x0@0 q=Motion t60=921600 p=Normal
2016.79 MC I: LocalVideoInputGateImpl::recalcIncomingMode(ig=1) res=0x0@0 q=Motion t60=921600 p=Normal
2016.79 MC I: LocalVideoInputGateImpl::recalcIncomingMode(ig=1) res=0x0@0 q=Motion t60=921600 p=Normal
2016.79 MC I: LocalVideoInputGateImpl::recalcIncomingMode(ig=1) res=0x0@0 q=Motion t60=921600 p=Normal
2017.09 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
2017.09 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 16 w 720 h 480
2017.09 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
2017.09 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 0 w 1280 h 720
2017.09 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
2017.10 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 8 w 1024 h 768
2040.06 VIDEOLC-0 I: VLC_readySignalSourceEvent port:HDMI 1: have signal
Solved! Go to Solution.
04-17-2013 11:08 PM
Hi Mahesh,
use commnad : "log output on" from admin login .
Kind regards,
Dharmmesh
04-17-2013 11:08 PM
Hi Mahesh,
use commnad : "log output on" from admin login .
Kind regards,
Dharmmesh
04-17-2013 11:41 PM
Dear Dharmesh,
Really appreciate your quick response and for what echo ON and OFF command used in this scenario, does this makes any changes.
Sincerely,
Mahesh Kumar
04-18-2013 01:18 AM
What do you refer to as "echo"?
The log command parameters (TC6) work like this:
log output
Unknown command or wrong number of arguments
usage: log COMMAND [PARAMETER]...
Commands to control message production:
ctx [CTX]+ debug N Enable debug level N (1..9) for the context CTX
Other commands:
list Lists registered contexts
output
Output log to this console. help This help text
Parameter:
LEVEL -
|info|notice|warning|error> CTX - context name (as can be seen from "log list")
a reboot should also stop the logging
Please remember to rate helpful responses and identify
04-18-2013 01:21 AM
These two documents might be also interesting for you:
https://supportforums.cisco.com/docs/DOC-29766
https://supportforums.cisco.com/docs/DOC-15643
Please remember to rate helpful responses and identify
06-05-2013 09:19 PM
Hi Dharmesh,
How to get only video or audio log output, because now if i say "log output on" it shows all the logs but if i want only any particular log. e.g. video, audio or network.
Sincerely,
Mahesh Kumar
06-06-2013 01:00 AM
Hi Mahesh,
If you want to look audio / video protocol, statistic, packet loss for call ,use xstatus It will have all detail.
Live log out put will provide detail for all logs , If you want to look specific log then log in from web interface go to current log and down load specific log .
hth
Kind regards,
Dharmmesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide