02-14-2016 10:33 AM - edited 03-18-2019 05:34 AM
Hi,
i want to know the Bandwidth Consumption when i use SX20 Multisite with three other SX10 over MPLS (Call rate fixed to 512).
Solved! Go to Solution.
02-14-2016 04:35 PM
The bandwidth consumption for SX20 will be whatever the total call rate is for every endpoint that is connected in the Multisite conference, while each SX10 will only consume what it's call rate is set to.
02-14-2016 04:48 PM
Don't forget to include an additional 20% for overheads, so a point-point 512kbps call would need approx 615kbps, which means the SX20, if hosting three other sites connecting at 512kbps each, would need approx 2.5Mbps b/w.
/jens
Please rate replies and mark question(s) as "answered" if applicable.
02-14-2016 04:35 PM
The bandwidth consumption for SX20 will be whatever the total call rate is for every endpoint that is connected in the Multisite conference, while each SX10 will only consume what it's call rate is set to.
02-14-2016 04:48 PM
Don't forget to include an additional 20% for overheads, so a point-point 512kbps call would need approx 615kbps, which means the SX20, if hosting three other sites connecting at 512kbps each, would need approx 2.5Mbps b/w.
/jens
Please rate replies and mark question(s) as "answered" if applicable.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide