There is no CUBE between the CUCM and the ITSP there is a trunksip directly from CUCM to the SBC ITSP.
So if i understand, i must change tso parameter in my config:
Fax passthrough to NSE Fax passthrough g711u
ECAN ON to OFF
i tried this config but we have the same issue error server connection
... View more
Issue with ATA190 and Postage Machine Neopost IJ35/50
We deployed on our company the ToIP system, we need keep some old analog phone, so we deployed some ATA 190. Our problem is the following:
We have a Postage Machine "Neopost IJ35/50" connected behind the ATA 190, in order to send/recieve information to/from the post office.
The postage machine must make a call to 08 XX XX XX XX number to establish connection with , but they are unable to communicate with the post office server, and when i try to check on the CUCM logs there is not trace for blocked or transmited call from the ATA190.
From CUCM, we tried to modify the settings on this ATA 190 box as follow, but without success.
FYI: with the DNA the route pattern is routed there is no blocked pattern and i tried with an analog phone with the same result call success so the problem provided from the postage machine
this bellow the configuration of the postage machine:
79679317.001 |14:52:59.918 |AppInfo |//SIP/SIPUdp/wait_SdlDataInd: Incoming SIP UDP message size 1190 from 10.129.179.30:: [164551407,NET] INVITE sip: CUCMIP SIP/2.0 Via: SIP/2.0/UDP 10.129.179.30:5061;branch=z9hG4bK-a35288f0 From: <sip:318041@CUCMIP>;tag=7a00bfb3f8eab5dao1 To: <sip: CUCMIP > Remote-Party-ID: <sip:318041@ CUCMIP >;screen=yes;party=calling Call-ID: email@example.com CSeq: 101 INVITE Max-Forwards: 70 Allow-Events: kpml Contact: <sip:firstname.lastname@example.org:5061;ref=026cb1da-a7f6-4fbd-aacc-5f080e0272f8>;+sip.instance="<urn:uuid:00000000-0000-0000-0000-9ad2c01cf001>";+u.sip!devicename.ccm.cisco.com="ATA9AD2C01CF001";+u.sip!model.ccm.cisco.com="681" Expires: 240 User-Agent: Cisco/ATA190-1.2.2(003) Content-Length: 279 Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER Supported: replaces, X-cisco-serviceuri, X-cisco-service-control, extended-refer, X-cisco-callinfo, X-cisco-srtp-fallback, X-cisco-sis-4.0.0 Content-Type: application/sdp
v=0 o=- 784242 784242 IN IP4 10.129.179.30 s=- c=IN IP4 10.129.179.30 t=0 0 m=audio 23912 RTP/AVP 0 8 100 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:100 NSE/8000 a=fmtp:100 192-193 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=ptime:20 a=sendrecv
... View more
I have be6k version 9 and CISCO SOFTWARE SUPPORT SERVICE - SWISS,
to begin installation I want to know if I can directly install the version 11 and activate it with the license version 9 and CISCO SOFTWARE SUPPORT SERVICE - SWSS, without going through the installation of version 9 and do the upgrade. Thanks
... View more