11-04-2015 03:27 AM - edited 03-18-2019 05:10 AM
Hello guys,
I ran the following command xcommand CallHistory Get to extract the CDR from my SX80, but I noticed that the duration time is in days ago.
I need to know if there is any other way to extract the CDR that allows me to know the exactly duration of the call in hh:mm:ss .
Thanks in advance.
Regards.
Solved! Go to Solution.
11-04-2015 03:38 AM
Hi,
If you do a xcommand CallHistory Get DetailLevel: Full it will show you the start and end from which you could derive the call duration.
Thanks,
Sebastian
11-04-2015 03:38 AM
Hi,
If you do a xcommand CallHistory Get DetailLevel: Full it will show you the start and end from which you could derive the call duration.
Thanks,
Sebastian
11-04-2015 04:47 AM
Hi Sebastian,
It worked perfectly!
Thanks a lot for your attention.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide