08-24-2012 12:14 PM - edited 03-17-2019 11:40 PM
Having a problem setting up DNS SRV records.
I have my internal call routing set up and workig correctly, and Jabber will register remotely just fine.
I can make calls outbound without issue, but when I try to call inbound, the call drops immediately.
I'm checking the call logs and no calls are hitting the VCSe.
I have a sip domain like this tele.mydoman.com
here are what my srv records look like
_h323cs._tcp.mydomain.com service = 10 10 1720 tele.mydomain.com.
Is this what they should look like to complete a call?
_h323cs._tcp.tele.mydomain.com service = 10 10 1720 tele.mydomain.com. (What it should be?)
FYI --- I am able to hit the VCSe with @ip and @mydomain.com, just not with tele.mydomain.com.
Any help would be appreciated. The VCS deployment guide isn't particularly clear on this issue.
Chris
08-24-2012 12:33 PM
Chris,
if you want remote users to call you at 'alias@tele.mydomain.com', you will have to create the appropriate SRV records on this domain, for instance
_sips._tcp.tele.mydomain.com
_sip._tcp.telemydomain.com
_h323ls._udp.tele.mydomain.com
_h323cs._tcp.tele.mydomain.com
These SRV records should point to the DNS A record of your Expressway.
08-24-2012 12:44 PM
Thanks,
That clears it up.
08-24-2012 06:58 PM
Please take a look https://supportforums.cisco.com/docs/DOC-25395 as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide