TelePresence and Video Infrastructure

Hii need some help about Teleprecense VCS (software version x7.1)cannot connect endpoints with h.323 protocol, after reset to factory default.i missed all values of zones and search rulesI can make calls in sip mode but no in h323 modethank for your ...

Hi all,I have CUCM 8.6 and VCS 7.2 with encryption licenses.Video IP phones 99XX and EX-series endpoint are registered on CUCM.Legacy videoconferencing endpoint and MCU are registered on VCS.Is it possible to enable encrypted calls:- point to point b...

After adding an MXP codec to my Network and editing the system settings in TMS I could not connect b/c it was preset to "Behind Firewall."When I change the connectivity in TMS to Reachable on LAN i get a system status of No Http response. And then lo...

I have a 7905 that won't work with my CUCM 8.0.2.  I have looked around here,cisco and google for the answer but I can't find it.  I can ping the phone from the command line and from the CUCM , pul up the webpage for the phone but it won't work.   It...

I am running MSE 8510 version 4.3(2.18) build 6.18(2.18). The system allows me to have a scheduled meeting and an ad-hoc meeting running at the same time with the same numeric ID. Scenerio:1. 10:20am EST I schedule a meeting for 10:30am EST called "9...

We are running into an issue :- We have integrated TMS with exchange and we have also deployed Cisco form in Outlook local client. Now when we schedule a conf call from Outlook using Cisco form and and when we add External jabber Client or internal...

Hello ThereI got a C-60 dual display  with two led displays. May I change the configuration of the ouput signals from codec. the problem is that I got the same image but with diferent colors on my room.Regards

I have a setup as briefly describe below where our meeting control softkey (on the 7975 phone of our CTS) dissapears after 3-4 minutes into a multipoint call.CTS (1.9) -->> CUCM (8.6.1) -->> VCSC (x7.0) -->> TP Server (2.2)The meeting control softkey...

Hi all !I have issue with MCU conference. I start scheduled conference from MCU with  16 preconfigured participants. MCU is H323 calling  to all preconfigured participant. But  one preconfigured  endpoint is receiving two simultaneous calls(one preco...

Hi,I'm looking for a good working solution on a case.First some background information:(VCS Control + TMS) + TMS Provisioning Extension & VCS ExpresswayProvisioning is working fine via the Control and Expressway. FindMe is enabled.A person has got an...

I have a problem with a customer that is unable to pull his phonebook from his TMS. Everything in TMS seems to be configured the way it should and the endpoints as well. Yet, when customer opens his phonebook, the server phonebook doesn't come on and...