06-11-2024 07:26 AM
Hi,
We want to use the camera ttc8-05 standalone with the trc6 remote. Moving up, down, left and right is done, but zooming is not done.
regards,
Solved! Go to Solution.
06-13-2024 01:06 AM
When the camera is not connected to a codec, the TRC6 doesn't support the zoom (as the +/- buttons are used for two purposes, both for zoom and as volume buttons depending on what state the codec is in).
You'll need to use one of the older TRC5 remotes which has separate zoom and volume buttons.
Please remember to mark helpful responses and to set your question as answered if appropriate.
06-13-2024 01:06 AM
When the camera is not connected to a codec, the TRC6 doesn't support the zoom (as the +/- buttons are used for two purposes, both for zoom and as volume buttons depending on what state the codec is in).
You'll need to use one of the older TRC5 remotes which has separate zoom and volume buttons.
Please remember to mark helpful responses and to set your question as answered if appropriate.
06-16-2024 06:48 AM
Thanks Wayne,
Is there any solution for trc6?
06-16-2024 05:58 PM - edited 06-16-2024 05:59 PM
No. As per my previous response, the TRC6 will not work for this purpose. You will need a TRC5. You should be able to pick one up second hand relatively cheaply.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide