We all know that the room kit plus comes with a Quad camera. The question is, can i add a 2nd camera? like the precision 60? Thanks in advance
Forum Posts
Hi All,We have an IPTV server (3425A) with an Optibase capture card and are trying to send TV from a satellite decoder to the COMP interface on the server.The decoder has a SCART cable which terminates in a standard video jack, so we have attached a ...
hello my device：room kit plus is registered with Cisco Cloud Server However, my device will often automatically disconnect during the meeting. The call history and disconnection reasons are as follows. Does anyone know how to solve this problem? *r...
Resolved! PASSTHRU OPTIONS FOR WEBEX ROOM KIT PLUS
Does anyone have the cisco powerpoint describing setting up the passthru options for the webex room kit plus, kit pro ? I believe one option was using the vaddio a/v bridge. Looking for cisco's recommendations for setting up passthru .. Thanks
Issue description:Roomkit system NTP settings change from Auto to Manual - Intermittent changeBehavior:+Forced the change to NTP auto and checked the settings. Reviewed logs found the following - eventlog/application.log noted the following log entry...
Equipment: Webex Room Bar (on prem) connected to single 65" screen LG UHD Commercial DisplayIssue: "No Signal" showing on screen. Correct source selected (confirmed as the LG screen names the source as Cisco Codec and when the codec was rebooted i...
We subscribed to STC SIP service and here is the configuration. It works, and I want to share with you my configuration for the voice gateway hostname SIP-VG!clock timezone GMT 3 0!voice-card 0!voice service voip ip address trusted list ipv4 0.0.0...
Main issue: The Webex Room Kit Mini is pulling an IP address, but the TelePresence Touch unit, which is connected to the Room Kit's dedicated Touch port (which I assume acts at least as a pass-through network port) is not (it's getting a 169.254.x.x...
Hi, everybody,The certificate cms expired, tell me how to change it (cms.cern and web bridge trust.car). There is a pfx file and a password for it. As I suppose it is necessary to build a chain. Is there any instruction on this issue or tell me what ...
Resolved! Detailed Incoming and Outgoing Calls
Does anyone know of a report that gives the most detailed level of data for incoming and outgoing calls?
We have many Webex Room Kits throughout our institution and are in the process of moving to OS 11.9.3.1. Since moving to OS11, we've needed to disable the On Screen Display (OSD) in order to properly show a wallpaper with instructions for using the s...
Hi, i installed newly cisco codec room kit plus and connected Cisco Navigator pannel but in the network option I am getting an error that "Has not yet received DNS address from DHCP" what is the reason behind this .... ethernet is okay ....what is th...
Resolved! RoomKit EQ lack of HDMI audio
Hello, reading the datasheet and admin guides of a Roomkit EQ lead us to interpret that it cames with HDMI audio out, but after some tests our technician found that the audio is not working on HDMI outputs, only the embedded QuadCam speakers provides...
Hi Community, I'm looking at designing a space and my question is can you direct the ceiling microphones towards each other or does this cause a problem? i've looked at every design showcasing them on Workspace and online and not once is there two ce...
Hi, we have a configuration with a Cisco Sx80 + Touch 10, 2 cisco P60 cameras, and a Creston 300 with an Android tablet and Creston Go Software.The monitors, Android Tablet, the Creston, are on a switch with a 172.xxx subnet and the cameras and the t...
