01-10-2015 12:46 AM - edited 03-18-2019 03:52 AM
Hi dears,
We have a client need to install EX60 and EX90 endpoints without CUCM.
My questions does it really possible to use EX60 and EX90 work individually without CUCM or other Centralized device registration?
Solved! Go to Solution.
01-11-2015 12:05 PM
Yes it's possible, the proper solution is to have them registered to either CUCM or VCS, but you can use them as a standalone endpoint without being registered to a call control server. See the link in my first reply for some discussion on how to set it up as a standalone endpoint.
01-10-2015 07:06 AM
You can use the EX60/90 as a standalone codec, and has been asked many times over. The SX and EX codec's are similar in configuration, if you search the forums for SX20 standalone, you'll find discussions on how to set it up.
01-10-2015 11:49 PM
Thanks Patrick,
Please verify is it the valid solution just providing EX60 and EX90 to our client without CUCM or other device. I am asking just to confirm it again.
01-11-2015 12:05 PM
Yes it's possible, the proper solution is to have them registered to either CUCM or VCS, but you can use them as a standalone endpoint without being registered to a call control server. See the link in my first reply for some discussion on how to set it up as a standalone endpoint.
01-17-2015 12:01 AM
Thanks again,
I tried having two EX60 unit just assigning them IP addresses and wonder i can call by dialing IP address of each other. I configured nothing else other than IP addressess :)
It would be great if i would able to dial using Extension/Name or do i able to make directory in standalone? Is it really possible or no?
One thing in my mind is to use DNS server
Awaiting reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide