This message will pop up when a device is connected to the DVI port. If it's continually popping up, then it suggests that the device that is on the end of the cable may be doing something strange and registering itself as connected, then disconnected at your 30 second interval.
One way you can stop this from popping up is to change the Video Input Connector 2 PresentationSelection from "On Connect" to "Manual". You will then need to manually press the Share button to display any content.
If you don't use proximity, you can also turn that off by setting the Proximity Mode to "Off".
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Wayne
Please remember to mark helpful responses and to set your question as answered if appropriate.
