Changing the Gatekeeper address on T3s

[Ayodeji Okanlawon]

Guys,

We have a couple of T3s that we need to migrate to a different system. I have the T3 admin guide and I can see that you can change the gatekeeper address from the system menu. That I think is only for the center codec. What process do I need to follow to change the gatekeeper address on both the left and right codecs. Is there any other thing I need to do for the T3 to register with the new VCS?

[nuinoahmed]

Hello Ayodeji,

When you change the gatekeeper ip address, you do it under the TCU.  TCU will replicate this chage to the 3 Codecs.  So you don't have to configure the codecs.

HTH,

Ahmed