Hi,I have installed Jabber Video for Telepresence 4.3 but while launching it throws error "New Feature in this version of Movi are not supported by your computer's graphics driver" Can anyone help me out here? Thanks,Vikash
Hi,I have installed Jabber Video for Telepresence 4.3 but while launching it throws error "New Feature in this version of Movi are not supported by your computer's graphics driver" Can anyone help me out here? Thanks,Vikash
We have to install 3 cameras on C-60 codec........the arrangemnt is as followsFirst camera --- on HDMI portSecond camera ---- on HDMI portThird Camera ------- on DVI port via DVI-HDMI convertorOn going to the camera settings option...........we are ...
I'm installing a Cisco TelePresence TX9000 and I wonder if I have to register and update the 03 CTS for the same software version and also lets them registered in the call manager?
Guys,We have a couple of T3s that we need to migrate to a different system. I have the T3 admin guide and I can see that you can change the gatekeeper address from the system menu. That I think is only for the center codec. What process do I need to ...
It is possible to make a call from a SX20 CUCM registered to an HDX8000 Polycom that is directly connected to Internet?
Is there a way to disable the Call History on the Touch 8 (attached to a c-series or ex-series unit)?What about the Call History in Jabber Video for Telepresence?I've a client that would like to do this, in order to discourage return calls in certain...
We have implementation of VCS control with VCS expressway within an internal leg of the Fortigate firewall with no dual NIC. We have NAT-ed virtual public IP for both inside the firewall. both VCS are in the same subnet (private IP and NAT-ed virtual...
Hi all,As you know 880 MXP is now EOS, but we can upgrade it to F9.3.1 now.I checked release notes and EOS announcement page but there were no description about the supported latest software version for EOS products.Does anybody know what is the supp...
Hi guys, We have a client reporting that he is receiving numerous fax calls every now and then, we got him to diver the call to a fax machine and trying to get the sending number and it is keep changing or sometimes come up with a dummy one like 1234...
Hello everyone, I got a quick question, how many input can C90 show at once during a call. I understand it can process up to 5. In short, Can i have the primary and secondary camera shown together during a call?? Thanks,Ken
hi all, I´ve got a question regarding a Quick Set SX20 Codec. I would like to do a Software update from TC6.2 to TC 7.0.2, but I don't know how to save and restore release key and option key. And, my system have TMS ver 14.3.2, VCS ver X7.2, If I up...
Any advise is appreciated.1. Two VTC systemsSite A is in CONUS (221.xxx.xxx.xxx)Site B is in Asia (151.xxx.xxx.xxx)Site C is in CONUS (NETOPS Desktop system) (207.xxx.xxx.xxx)Site B system is also registered to VCS and Site A is in direct mode.Site ...
Hello,What is the best implementation for a SIP trunk between a VCS control cluster and a CUCM cluster (1 Pub + 1 Sub)?Should we create 2 Sip trunks from CUCM publisher one to VCS control 1 and a second to VCS control 2. On on VCS control 1 (Master)...
Hi All, In my understanding the deployment guide does not clearly state that the Encryption key is a must, it simply states that "The TelePresence MCU has the ability to use a secure connection for communications."I don't have a valid service contrac...
I have a C90 that has a multisite license and the multisite works for the most part except for the second site that is connected to the call. The second site get audio but no video is transmitted. All they see is a black screen unless context is be...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-05-2024 03:26 AM | ||
08-20-2024 07:09 AM | ||
08-20-2024 03:11 AM | ||
08-13-2024 12:04 PM | ||
07-29-2024 10:10 AM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |