A Chairde,
My Cisco AS5350 has recently had problems that force us to reload to get services back.
When we alter the script, change CODECs , destination patterns , change H323 Voip-ID etc ..., after 3-4 Changes we get this error:
1w5d: %IVR-3-LOW_CPU_RESOURCE: IVR: System experiencing high cpu utilization (99/100).
Call (callID=18) is rejected.
We are forced to RELOAD , as all calls are blocked.
This only happens when alterations are made to running config .
cnibhco112#sh ver
Cisco IOS Software, 5350 Software (C5350-JS-M), Version 12.4(1a), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Fri 27-May-05 15:50 by hqluong
ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5400 Software (C5400-BOOT-M), Version 12.1(1)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc2)
cnibhco112 uptime is 7 minutes
System returned to ROM by reload at 14:49:21 UTC Fri Jan 19 2007
System image file is "flash:c5350-js-mz.124-1a.bin"
Cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.
Processor board ID JAE0622003B
R7000 CPU at 250MHz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from IOS reload
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
Board Hardware Version 3.33, Item Number 800-5171-02,
Board Revision B0, Serial Number JAE0622003B,
PLD/ISP Version 2.2, Manufacture Date 29-May-2002.
Processor 0x14, MAC Address 0009.7ca3.2930
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet interfaces
68 Serial interfaces
60 terminal lines
2 Channelized E1/PRI ports
512K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
