cisco c60 standby log

[Cisco User]

hello friends;

how can ı see stand by log in C60?

[amehla]

Hi ,

can you give us detail about it ?

do you mean standby xstatus logs ?

[Cisco User]

Hi Amit,

I would like to know that the device's standby mode at which time.

Necessary for the forensic process.

[Ashwani Pande · Accepted solution]

Hi,

You can check the logs and will see somthing similar to below which indicates system is going into standby mode as per standby mode configuration.

1350.31 VIDEOLC-0 I: PowerManagement, request power save on

1350.32 VIDEOLC-0 I: PowerManagement, backlight off

1350.66 VIDEOLC-0 I: PowerManagement, power save on confirmed, no error

1360.05 VIDEOLC-0 I: Received SourceFormatEvent from video link 18 (0x0@0, digital, ok) in ready state

and will see below when it will come up.

2742.59 MainEvents I: LeavingStandby()

2742.60 VIDEOLC-0 I: PowerManagement, request power save off

2742.68 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=0/0/64/82

2742.68 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=34481464/35267408/64/82

2742.97 VIDEOLC-0 I: PowerManagement confirm, backlight on

2742.98 VIDEOLC-0 I: PowerManagement, power save off confirmed, no error

Please let me know if that helped

[Cisco User]

Thanks Ashwani;

that helped me