cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
979
Views
5
Helpful
1
Replies

Cisco CMS WebRTC

ailhan001
Level 1
Level 1

Hello,

 

my cms1 address: cms1.test.local port 8443 

webrtc address: join.test.local port 443

in my lab

Dns server solves for cms1.test.local and join.test.local are same  ip address which is 192.168.0.22

This is DNS Records:

 

C:\Users\ailhan>nslookup
Default Server: test.test.local
Address: 192.168.0.205

> cms1.test.local
Server: test.test.local
Address: 192.168.0.205

Name: cms1.test.local
Address: 192.168.0.22

> join.test.local
Server: test.test.local
Address: 192.168.0.205

Name: join.test.local
Addresses: 192.168.0.22
192.168.0.23

i reach cms server from: cms1.test.local:8443

for webrtc: cms1.test.local or join.test.local

 

but when i try to send invite message to someone cms sends cms1.test.local address. i want to send join.test local.

 

You're invited to my online meeting.

 

https://cms1.test.local/ 

Call ID: 786502106

Passcode: 1234 

like that.

 

what i am doing wrong?

 

 

1 Accepted Solution

Accepted Solutions

Jonathan Unger
Level 7
Level 7

Hi There,

 

There are 2 items you should check on:

  1. CMS Server Web GUI
    1. Navigate to Configuration > General "Web bridge settings"
    2. Ensure that the "Guest account client URI" field is configured for "https://join.test.local"
    3. Save
  2. TMS Server Web GUI
    1. Find the CMS server under "System > Navigator"
    2. Select "Settings" and then "Edit Settings"
    3. Ensure that the "Web Bridge" URI value is configured with "https://join.test.local"
    4. Save

Please let us know if this corrects the issue.

 

Thanks!

 

- Jon

 

*** Remember to rate posts as helpful and mark answers as correct if appropriate.

View solution in original post

1 Reply 1

Jonathan Unger
Level 7
Level 7

Hi There,

 

There are 2 items you should check on:

  1. CMS Server Web GUI
    1. Navigate to Configuration > General "Web bridge settings"
    2. Ensure that the "Guest account client URI" field is configured for "https://join.test.local"
    3. Save
  2. TMS Server Web GUI
    1. Find the CMS server under "System > Navigator"
    2. Select "Settings" and then "Edit Settings"
    3. Ensure that the "Web Bridge" URI value is configured with "https://join.test.local"
    4. Save

Please let us know if this corrects the issue.

 

Thanks!

 

- Jon

 

*** Remember to rate posts as helpful and mark answers as correct if appropriate.