07-08-2017 11:34 AM - edited 03-18-2019 01:16 PM
I have install core,edge and database and need to configure it can any one help me in this regard
07-08-2017 08:14 PM
CMS database is part of the Core server, refer to the CMS Configuration Guides on how to configure the database.
07-13-2017 02:52 AM
Hi All,
Can you please confirm which license is used by Call bridge
Product | Description |
LIC-S52010-CE-K9 | License Key Software Encrypted |
LIC-SMP+EP | Shared Multiparty License for 1 Concurrent Meeting |
CON-ECMU-LICSMPEP | SWSS UPGRADES Shared Multiparty Li |
LIC-TP-ROOM-11.X | Choose if VCS or for CUCM version 11.x TP-Room License |
LIC-EXP-RMS-PMP | RMS Licensing included with PMP & SMP |
LIC-EXPE-PMP-PAK | Expressway Series, Expressway-E PAK |
LIC-TP-SMP-INC | Shared Multiparty License for 1 Concurrent Meeting |
LIC-CMS-PAK | Cisco Meeting Server (CMS) PAK |
LIC-CMS-SMP | Shared Multiparty License for 1 Concurrent Meeting for CMS |
LIC-VMCNDTR-PMP-PK | PAK for virtual Conductor |
Product | Description |
CUWL-PMP+K9 | Migration from CUWL Pro, PMP or Acano to PMP Plus |
CON-ECMU-CUWLPMP9 | SWSS UPGRADES Migration from CUWL |
LIC-CMS-PAK | Cisco Meeting Server (CMS) PAK |
LIC-2-PMP+ | Cisco Meeting Server (CMS) PMP License for 1 Concurrent Meet |
CON-ECMU-LIC2PMP | SWSS UPGRADES Cisco Meeting Server |
LIC-EXP-MSFT-PMP | Microsoft Interoperability Option |
LIC-TMS-PMP-PAK | TMS PAK for Configuration Use |
LIC-CNDR-PMP-C2400 | Conductor 2400 call sessions license |
LIC-CNDTR-PMP-CL | Conductor clustering support |
LIC-TMS-25-PMP | Cisco TMS - Additional 25 Direct Managed Systems |
LIC-VMCNDTR-PMP-PK | PAK for virtual Conductor |
LIC-TP-PMP-USER | 1 XC PMP User License |
LIC-CMS-PMP-M-USER | Cisco Meeting Server (CMS) PMP License for 1 Concurrent Meet |
CON-ECMU-LICMUSER | SWSS UPGRADES Cisco Meeting Server |
LIC-CNDTR-PMP-B30 | Conductor license, support up to 30 bridges |
LIC-EXPE-PMP-PAK | Expressway Series, Expressway-E PAK |
LIC-CNDTR-PMP-K9 | Conductor License for Base Encrypted Software Image |
07-13-2017 03:37 AM
Hi,
It comes with SMP or PMP licenses. SMP (Shared multiparty) shared across pool of user for conference and PMP is kind of named licenses apply to named user. So if the user initiate an adhoc conference who is allocated to PMP pool will consume PMP licenses, however if the user is not part of PMP allocation pool then it uses SMP license.
LIC-CMS-PAK | Cisco Meeting Server (CMS) PAK |
LIC-CMS-SMP | Shared Multiparty License for 1 Concurrent Meeting for CMS |
LIC-CMS-PAK | Cisco Meeting Server (CMS) PAK |
LIC-2-PMP+ | Cisco Meeting Server (CMS) PMP License for 1 Concurrent Meet |
LIC-CMS-PMP-M-USER |
Cisco Meeting Server (CMS) PMP License for 1 Concurrent Mee |
This are all CMS licenses.
Regards,
Alok
07-13-2017 03:48 AM
07-13-2017 04:33 AM
have you installed license on the server ? you can winscp into the system and then upload the license file there.
if you run the command "license" on the CLI it gives the details about the installed license, otherwise output of the command will not return any result.
Regards,
Alok
07-13-2017 04:45 AM
Hi,
How to check CMS server Mac Adress??
07-13-2017 05:05 AM
you can run the command on CLi "iface a" and this will give you the mac-address.
I hope you are allocating your components to interface "a" on the core.
Regards,
Alok
07-16-2017 06:05 AM
Hi Alll,
I have done below configuration on my core is it correct?Using self signed certificate
pki selfsigned webadmin
webadmin certs webadmin.key webadmin.crt
webadmin listen a 443
webadmin restart
webadmin enable
webadmin disable
webadmin listen a 445
webadmin enable
pki selfsigned callbridge
callbridge certs callbridge.key callbridge.crt
callbridge listen a
callbridge restart
07-16-2017 05:38 PM
That's the very basic of it, There is more config involved when you go further. like using postman api for LDAP config, user profile creation etc. Also look at the config guide for webrtc using cms with expressway.
Also you need to define rules for incoming and outgoing calls.
Regards,
Alok,
07-16-2017 11:24 PM
Hi Alok,
Can you please share any customized guide for LDAP config and user profile creation??
07-17-2017 07:49 AM
Here are the guides: CMS Configuration Guides and CMS API Guides.
07-18-2017 02:05 AM
Hi All,
Need help in below query
Title:
CMS SRV record
Description:
Callbridge generate the following domain but our DNS team has concern that's it a public domain instead of this you can you internal domain i.e. nfoods.complease guide
Callbridge : cms
Domain : uc.xcloud-hk.com
Secret : 7L2pbQpu6ABaN8DhAb1
07-19-2017 12:50 AM
Hi Guys,
Thank you for your kind support. I am able to Dial successfully from Cisco Meeting App.No the task is we have to configure Webbridge for WebRTC client and test the call through WebRTC client.Can any one help me in this regards??
07-19-2017 12:53 AM
Hi,
you need to refer the guides mention above.
regards,
Prasad Paradkar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide