Does the DX80 support Multisite option? Is a license required to operate this or does it come as default?
Does the DX80 support Multisite option? Is a license required to operate this or does it come as default?
Hello team, I have set up recording for my CMS but I get the following message Recorder "https://10.4.2.30:447" unavailable (connect failure)
Hi, Our TP endpoints connected the TMS address book.One day, the TP endpoints disconnected on the TMS and lost the address book.How can I keep the address book when the TMS disconnected?Is it query the http to get the address book every time from TP ...
We are interested in dual monitor MX800 Telepresence system. I would like to get some clarification about this system. Can we use this system as part of a video conferencing involving external users from different platforms including WebRTC and HTML5...
Dear I have a problem with Handset which is connected to Touch Panel. It is detecting on the touch panel but the problem If I am using speaker both side can hear each other. If I used handset the caller can hear the other side but other side which re...
I can't switch from speaker phone to handset without using the web interface. I can change from handset to speaker phone on the phone screen but it doesn't let me reverse it afterwards. The only option is speaker phone.
I am currently using a SX-20 on a mobile cart device with a touch 8. Devices register to vcs and are setup in tms. I am currently using the sx-20 and touch 8 behind a small router because I want the device to auto resync\connect the touchpad whe...
Hi folks, Our customer needs the ability to fix a route from hdmi input 1 to dvi output 3 that never turns off or changes regardless of what the codec does, in a call, not in a call, multisite etc... I looked in the SX80 admin guide at the latest r...
Hi, There is any way that I can connect 2 Cisco cameras to sx80 and control both of them from the Cisco TP? We don't want to use iPad or other external control rather the Cisco touch panel. How can I make this deployment? Thanks, Shy
I have two site and going to implement TP between them. How can I decide whether current BW would be sufficient or not? What is the minimum required BW to operate TP endpoints?
Is it possible to access a remote SX20 via web and verify whether it has been paired with a Touch 10?
Hi All, I'm looking to implement GetConferencesForSystems (TMSBooking Service) in such a way that I can get the conference participants with the conferences. Currently when I pass in say 3 system IDs I can get the conferences they belong to, but ...
Hi everybody, is there a way to configure session timeout (as for web accesses, via browser) for TS (v4.4)? i've looked for it through Cisco documentation but i was able to find out only the "serial console session timeout". Thanks, Gianluca
I am looking to use the touch 10 to control a multi zone amplifier. I have access to most brands.
Hello Team , Can someone clarify how should I proceed with the migration process I understand I can take a backup/restore, but it requires the Option Keys to be the same on the UCS server. My question is how the Option Keys are going to be ready for ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |