Cisco TelePresence Conductor XC4.2 - licensing Question

[marco_81]

Hi all,

i'm using Conductor with uploaded option keys:

LIC-CNDTR-B30

LIC-CNDTR-C50

could anyone explain which are capabilities i can employ with these licenses in place?

regards

[marco_81]

Is the link below:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-2.pdf

enough to understand the two items?

I have to be sure about capabilities offered by those two items, help will be very useful.

best regards

[Oleksandr Yurchenko]

Hello,

Your licenses needed for deploy Full Capacity Conductor .

Please see datasheet: https://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-conductor/data_sheet_c78-709046.html  and link from m.fina@hitachi-systems-cbt.com 

Read about "Different Sized Deployments"

[Patrick Sparkman]

Those licenses are for Conductor Select (refer to Table 1 of the Conductor Data Sheet):

• LIC-CNDTR-B30 - Conductor license, support up to 30 conference bridges.
• LIC-CNDTR-C50 - Conductor 50 call sessions license

[marco_81]

Thanks all for reply,

but i know that if you want to use CMR you need screen licenses or Multy party licenses and at the moment i don't have uploaded those, CMR does not work as i dial the alias configured for the conf bridge. So my question is what's the purpose of :

• LIC-CNDTR-B30
• LIC-CNDTR-C50

?

Can you confirm they are not enough to have CMR working?

thanks

[Patrick Sparkman · Accepted solution]

In order to host conferences on the TelePresence Server, it either needs screen licenses installed on it, or Mulitparty licenses (PMP or SMP) install on Conductor.
As mentioned in my previous reply, the two licenses enable you to use Conductor will up to 30 conference bridges and support up to 50 concurrent calls.