cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
905
Views
0
Helpful
2
Replies

Cisco TelePresence Conference Director - SIP support

David Anstee
Level 4
Level 4

How do you use Cisco TelePresence Conference Director to schedule an MCU call with a SIP Endpoint?

2 Replies 2

crisalex
Cisco Employee
Cisco Employee

Well if I am not wrong, you can not choose when you add a new partcipant the call out protocol. However as long as you have a sip endpoint you can simply put the address in the Add Paticipant > Address list and the MCU will call out

Regards

There are NO options within Conference Director to select SIP

If I prefix the dial string with sip (e.g. sip:user1@fqdn.com) it still calls out as H323

If you establish a SIP call from within the Web GUI of the MCU, you can then disconnect and reconnect a SIP client from Conference Director - but you cannot establish a new participant from Conference Director.

This is a major issue for a customer of ours...