CMS 3.2.1 - webbridge3

[Paulo Ferreira]

Hello,

we ware trying to configure certificates in our cms in service webbridge3 and we are unable to start the service:

acano> pki verify webbridge3.cer BundleCARootWB3.cer
Success
acano> pki match webbridge3.key webbridge3.cer
Matching certificate and private key

acano> webbridge3 enable
FAILURE: HTTPS Key and certificate problem: certificate and key do not match
FAILURE: Webbridge3 configuration not complete

acano> webbridge3
Enabled : false
HTTPS listening ports and interfaces : a:443
HTTPS Key file : webbridge3.key
HTTPS Full chain certificate file : BundleCARootWB3.cer
HTTPS Frame-Ancestors : none
HTTP redirect : Enabled, Port:80
C2W listening ports and interfaces : a:999
C2W Key file : webbridge3.key
C2W Full chain certificate file : BundleCARootWB3.cer
C2W Trust bundle : BundleCARootWB3.cer
Beta options : none

our BuldleCARootWB3.cer was made following the documentation:

Entity cert

int cert

root cet

Any help?

Regards

[Nithin Eluvathingal]

acano> pki match webbridge3.key webbridge3.cer
Matching certificate and private key>>

From your post, i don't see success for  your certificate match with the key.

[Paulo Ferreira]

Thanks for your repoly but the answer obtained from command pki match is the expected when is ok.

Best regards

Paulo Ferreira

[Paulo Ferreira · Accepted solution]

Hello,

we reinstalled the cms again and follow the same procedure with good results...

Regards