cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2294
Views
0
Helpful
4
Replies

CMS license issue

ilyas.safarov
Level 1
Level 1

Hello dears,

 

I have an issue with CMS license.I've installed license file with 35 PMP licenses and from cli can see them installed. But the WEB interface shows "This CMS is running in evaluation mode; no calls will be possible until it is licensed."

 

Thanks in advance.

Ilyas.

1 Accepted Solution

Accepted Solutions

0 usd dollar license needed to completed CMS activation 
LIC-CMS-PAK 
LIC-CMS-K9

 

Please open a TAC case to Cisco Global Licensing Team and they should provide you with licenses.

View solution in original post

4 Replies 4

Jaime Valencia
Cisco Employee
Cisco Employee

Have you installed the CB license?

HTH

java

if this helps, please rate

I've got LIC-CMS-PAK and generated a lic file for particular MAC address. Renamed the file to cms.lic. It's ok from cli , it shows 35 PMP licenses , but WEB interface  shows , there is no licenses.

0 usd dollar license needed to completed CMS activation 
LIC-CMS-PAK 
LIC-CMS-K9

 

Please open a TAC case to Cisco Global Licensing Team and they should provide you with licenses.

Tianjun Zhou
Level 1
Level 1
You need restart the callbridge