03-26-2018 09:01 AM - edited 03-18-2019 02:00 PM
Since I am using a 3rd party control system (Crestron), I would like to remove the on screen icons for dial and share since they are not relevant. Is there any way to do this? Since I don't see an obvious place in the settings, I am hoping it may be a command I could send via Telnet or something to that effect.
03-26-2018 09:10 AM
You didn't mention the SW version you are running, but on TC7.3 the command to disable the OSD (On screen display) is on page 77 of the API guide
04-19-2018 08:00 AM
ce 9.1.3 - I believe that option has been removed in subsequent versions after 7.3
03-26-2018 10:21 PM
04-19-2018 08:01 AM
I do have a custom wallpaper, but it doesn't remove the Call/Share icons.
04-15-2018 09:44 PM
If you're only using a single screen on your SX20 (and not Dual-Display), then connecting your screen to the second video output stops the OSD from displaying.
Please remember to mark helpful responses and to set your question as answered if appropriate.
04-19-2018 08:17 AM - edited 04-19-2018 08:17 AM
It worked by swapping to output 2. I did have to set the horizontal offset to -1. It was set, not sure by default, to 1; it cropped the image on both sides. Setting it to 0 did not change, but once set to -1, it seems normal.
All this being said though, I did find a better solution. Simply by changing the OSD out to 2 in the User Interface menu. (I am indeed only using one display, so this is a doable workaround. I do have a room with dual display that will need a different method of trickery...
04-25-2019 08:46 PM
The ability to hide the default GUI panel buttons was added in software release CE9.6.1 in January 2019. You can do it with the following command:
xConfiguration Peripherals InputDevice Mode: Off / On
Please remember to mark helpful responses and to set your question as answered if appropriate.
04-03-2019 03:01 PM
Login to WebUI
Setup -> Configuration ->UserInterface
Under Features set "Hide All" to TRUE.
Icons gone.
12-08-2020 10:16 AM
User Interface -> Hide All : True
User Interface -> Share Start : Hidden
Video -> Connector2 -> Visibility : Never
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide