10-17-2018 05:49 AM - edited 03-18-2019 02:24 PM
Hello,
i just want to configure the Hybrid Call Service on Ecpressway C but there is no "Configurations" Tab on the GUI!
Is that a bug or the customer did something wrong with the installation? Is it possible to activate the configurations tab?
Thank you!
Cheers
Solved! Go to Solution.
10-18-2018 02:21 AM - edited 10-18-2018 02:22 AM
Hello,
I found the issue. If you choose "Spark Hybrid Call Service" - tick, then the Configurations tab disappears.
10-17-2018 03:26 PM
10-18-2018 01:34 AM
Thanks for quick response!
I thought the same, but in Cisco`s deployment Guide I read the following sentence:
You do not require a release key, or an Expressway series key, to use the virtual Expressway-C for Cisco Webex Hybrid Services. You may see an alarm about the release key. You can acknowledge it to remove it from the interface.
10-18-2018 02:21 AM - edited 10-18-2018 02:22 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide