01-23-2019 04:06 AM - edited 03-18-2019 02:36 PM
Hi,
we have one installation of Expressway-C and E where the E has one single NIC with NAT enabled.
The MRA Zone from the C to the E is connected to the Public NAT IP (NAT reflection) and the Zone is working / established.
But the Zone from Expressway E is not connected to the IP of the Expressway-C (internal LAN) but to any IP of the ASA firewall which I think is not correct although with this "firewall ip" the Zone in the E is "green".
At the moment MRA is also NOT working as I think there is still a config failure in the Cisco ASA NAT reflection.
Is it correct that the Zone from the Expressway-E must be established to the internal LAN IP of the Exp-C and not to any firewall IP?
BR
Michael
01-23-2019 06:51 AM
01-23-2019 07:36 AM
Hi Shalid,
the MRA zone of Exp-C is configured the the FQDN of Exp-E.
The FQDN of Exp-E is acutally confgured to his NAT IP (Public IP) which is described here at page 62:
Is this not correct to configure the MRA Zone of Exp-C to the NAT IP of Exp-E?
And why the Exp-E is not connecting to the IP of Exp-C but to any firewall IP?
BR
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide