03-31-2021 10:26 AM
Hello everyone,
We re trying to register an SX20 to a CUCM 8.6. However, we are getting Failed: 404 Not Found error message. We installed device package cmterm-devicepack8.6.2.25140-1.cop and rebooted the CUCM.
We are running CUCM version 8.6.2.20000-2 and SX20 firmware is TC7.0.2.aecf2d9. We actually have a C40 uo and running in the same CUCM but a different firmware version TC6.2.1.69d401c.
Thanks for any ideas you might share.
04-09-2021 05:31 AM - edited 04-09-2021 05:33 AM
Mister possibly Necrophiliac ))), why CUCM 8.6?
I didn't find anything about SX20 here (Device Package 8.6(2)(25140-1) Release Notes)
04-14-2021 08:02 PM
On your cucm, after installing devicepack , did it gave you an option to choose device type as SX 20 while adding the device?
doesnt looks like that dev pack has sx 20 support.
So CUCM sends a 404 for registration method.
--------------------------
Cisco DX650, DX70, and DX80
Cisco Device Package 8.6(2)(25140-1) introduces support for Cisco DX650, DX70, and DX80. You must
download and install Cisco Device Package 8.6(2)(25140-1), which includes the QED necessary for these
Cisco DX devices to function.
Firmware for the DX models is not in the device package, but when available it can be downloaded from the
model location on Cisco.com.
//V.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide