Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys, I'm trying to connect to Cisco WFM via Postman but I'm getting a 500 internal server error. I've been following the next guide: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/workforce_optimization/qm...
Hello everyone, We re trying to register an SX20 to a CUCM 8.6. However, we are getting Failed: 404 Not Found error message. We installed device package cmterm-devicepack8.6.2.25140-1.cop and rebooted the CUCM. We are running CUCM version 8.6.2.200...
Hello experts, I have a CUCM 11.5 and a CUCM 8.6 integrated via SIP Trunk. On CUCM 11.5 I have 9951 phones. On CUCM 8.6 I have 8945 phones. Video calls in same CUCM cluster are working just fine. Video calls between cluster are not working though. ...
Hello experts, We would like to know what could be the potential issues of having a CUCM cluster running on an unsupported server based on someone else's experience. We detected a customer with CUCM cluster (1Pub and 2 Subs)10.5 running on a UCS M5 ...
Hello guys,
I was wondering if Meet Me is available to use on DX650?
I'm running a CUCM 10.5.2 and DX650 version: 10-2-5-194
Any idea about this?
Thanks in advance!
Hello Ayodeji, I'm having an issue with calls between two CUCM cluster using a SIP Trunk. Cluster A is 172.17.240.4 and cluster B is 172.16.100.2. The calling number is 5590 register to Cluster A and the called number is 5080 register to Cluster B. ...
Hey Guys,
Problem was solved. I did a downgrade to Expressway version from 8.7.1 to 8.7.
CUCM and IM&P version: 10.5.2.12901-1
Just for your information I did another implementation and everything works fine but in this case the versions were diffe...
Ok but in this case my Jabber version is 11.1.2.
Otherwise I'm having the following message on expressway c Logs:
2016-05-26T10:08:03-04:00edgeconfigprovisioning: Level="WARN" Service="ECS" Detail="Request failed" User="('username', 'a.martinez')" ...
